Jump to content

3 way active setup, need advice on amp selection


b2sdad

Recommended Posts

Hey there Guys, 

New to the SQ side of things. So be patient with me please. My current front stage setup is HA Legatia L1 V2Tweets and L3 V2 Midrange in custom A Pillars in an 06 Nissan Titan. For the mid bass I'm using my old Soundqubed mids, until I can get some Hybrid Audio Unity 6x9s in the front doors. My question is what's a good 6 channel amplifier to run this? Also, I'm thinking i either need a DSP or I need an amp with some series crossover flexibility? what say you?  

2006 Nissan Titan Crew Cab

XS Power D6500 up front, Mechman 270 amp alt, 

Front Stage:Hybrid Audio Legatia Tweeters and Midrange drivers in Custom A Pillars, HA Unity 6x9 inch Midbass in the doors, powered by an Arc Audio 1200.6 X2 and connected to a JL TWK 88 DSP

Subwoofers: Four 8 inch Soundqubed Subs in a ported enclosure. Incriminator Audio 20.1 on the subs (@ 1ohm) 

Performance: JBA Headers, Uprev Tuned, Dynomax bullet muffler, 3 inch exhaust all the way back. Air raid CAI.

Wheels: 18 inch Balistic Jester wheels on 33 inch Nitto TG2's

Suspension: 6 inches of lift total. DK UCA's, DK LCA's, Icon coilovers up front, Bilstein Shocks in the rear with 4 inch blocks 

 

2007 Chevy Suburban LTZ

Engine: 5.3 DOD Delete, BTR Stage 4 truck Cam, TSP Headers, Gibson Catback exhaust. Tuned by Sam @ Advanced Modern Performance.

Suspension: 2/4 Belkin drop. Belkin Sway bars, Spohn Panhard bar

Audio: Pioneer 8400 NEX Head unit, Audio Dynamics DSP, 6th order enclosure with three 10 inch DC Audio Level 4s behind the third row. Wolfram 4500 on Subs, Wolfram AW 250.4 on the front stage Dual SkyHigh Car Audio 8 inch mid bass in the doors, quad 3.5 inch midrange drivers in the A-Pillars 

Dual Alternators, Mechman 320 powering a CES 40ah Lithium battery, OEM alt has an AGM on it.Viper remote start.

 

Wheels:  24 inch Luxx wheels/ 305/40 R24

Grammatically speaking, Prolly is not a word.

Link to comment
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Could look into audio control I think they have some 6 channel amps.

if not a dsp sounds like a good idea. Never ran one so I can’t help you out there.

Link to comment
Share on other sites

Yes, I believe they do. I think i have it narrowed down to Phoenix Gold, Arc Audio and Zapco. Budget is a factor as well. I had a rockford 360.3 as my DSP in the past, I didn't like it at all.  

2006 Nissan Titan Crew Cab

XS Power D6500 up front, Mechman 270 amp alt, 

Front Stage:Hybrid Audio Legatia Tweeters and Midrange drivers in Custom A Pillars, HA Unity 6x9 inch Midbass in the doors, powered by an Arc Audio 1200.6 X2 and connected to a JL TWK 88 DSP

Subwoofers: Four 8 inch Soundqubed Subs in a ported enclosure. Incriminator Audio 20.1 on the subs (@ 1ohm) 

Performance: JBA Headers, Uprev Tuned, Dynomax bullet muffler, 3 inch exhaust all the way back. Air raid CAI.

Wheels: 18 inch Balistic Jester wheels on 33 inch Nitto TG2's

Suspension: 6 inches of lift total. DK UCA's, DK LCA's, Icon coilovers up front, Bilstein Shocks in the rear with 4 inch blocks 

 

2007 Chevy Suburban LTZ

Engine: 5.3 DOD Delete, BTR Stage 4 truck Cam, TSP Headers, Gibson Catback exhaust. Tuned by Sam @ Advanced Modern Performance.

Suspension: 2/4 Belkin drop. Belkin Sway bars, Spohn Panhard bar

Audio: Pioneer 8400 NEX Head unit, Audio Dynamics DSP, 6th order enclosure with three 10 inch DC Audio Level 4s behind the third row. Wolfram 4500 on Subs, Wolfram AW 250.4 on the front stage Dual SkyHigh Car Audio 8 inch mid bass in the doors, quad 3.5 inch midrange drivers in the A-Pillars 

Dual Alternators, Mechman 320 powering a CES 40ah Lithium battery, OEM alt has an AGM on it.Viper remote start.

 

Wheels:  24 inch Luxx wheels/ 305/40 R24

Grammatically speaking, Prolly is not a word.

Link to comment
Share on other sites

4 hours ago, b2sdad said:

Hey there Guys, 

New to the SQ side of things. So be patient with me please. My current front stage setup is HA Legatia L1 V2Tweets and L3 V2 Midrange in custom A Pillars in an 06 Nissan Titan. For the mid bass I'm using my old Soundqubed mids, until I can get some Hybrid Audio Unity 6x9s in the front doors. My question is what's a good 6 channel amplifier to run this? Also, I'm thinking i either need a DSP or I need an amp with some series crossover flexibility? what say you?  

Zapco 150.6 and yes use a dsp

Link to comment
Share on other sites

4 hours ago, b2sdad said:

Yes, I believe they do. I think i have it narrowed down to Phoenix Gold, Arc Audio and Zapco. Budget is a factor as well. I had a rockford 360.3 as my DSP in the past, I didn't like it at all.  

That’s interesting. I’ve heard quite a few people disliking their 360s. What made you not like yours? 

Link to comment
Share on other sites

Look into Zapco 6 channels and the Audison Bit one processor 

Team MaxRetribution

Si Vis Pacem Parabellum
Id rather be judged by 12 than carried by 6

Bowhunting- Life Begins and Ends at Full Draw

Bowhunting Team Fatal Trajectory Hunt Team

 

http://www.stevemeadedesigns.com/board/topic/49335-sick96vtecaccords-t-line-build/?hl=sick96vtecaccord << Accord Build

http://www.stevemeadedesigns.com/board/topic/68498-smokedout08impalas-tline-build/?hl=+sick96vtecaccord << Impala T-line build

 

Rebassed.com for all your music needs 👌

Link to comment
Share on other sites

Love my Helix. Just Saying 

Kenwood / HELIX / Linear Power (For The Love Of Music) / Brutal Sounds / OverKill Electric Co 

Questions About Sound Quality ?? Try Here ... Sound Quality, What does it REALLY mean ?? 

SMD SOTM Winner "White Lightning" 1997 GMT400 Chevy Silverado   

"The Green Dickle" 1994 GMT400 Chevy "Phantom Dually"   

Randal's 2007 Chevy Avalanche (we haven't named this one yet)

Dylan's "Brutal" 17 Chevy Cruze RS Hatch                         

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.




×
×
  • Create New...