Jump to content
Second Skin Audio

design help! AB es1244


Recommended Posts

so I cant make my shallow AB 12s sound good under the rear seat of my truck. I gave up and ordered 4 soundqubed hds2.108s instead. Now I have these 12s sitting here and want to put them in my work suburban. I want to build a box that's roughly 14-18" tall, around 35-40" wide, and as shallow as possible. subs have amounting depth of 4.3", .75 cubes of air space, want tuned about 33ish ( unless someone thinks I should tune differently?), will have about 1k rms powering it. anyone needing t/s specs, pm me and I can email it to you., I cant understand why I cant attach an image ever on this forum. cannot resize anything small enough to be accepted. I really really want these subs to sound as good as AB says they do! every other AB sub I have dealt with has been very impressive, and I cant believe these would be any different. thanx everyone in advance for the help.  there is too much I don't know about box design to come up with a scenario that will work for these things.

 

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

https://ibb.co/YLd0jNM

 

T/s specs straight from AB

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 212 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...