javyd99 Posted June 15, 2019 Report Share Posted June 15, 2019 Need help!!! Is there anyway I can fit 4 sundown x8 v2 under my seat in a 2013 2500hd crew cab? I put a 2 1/2 inch lift on the seat already. I would like a ported box but not sure I will have enough air space as I am new to box building. I have 1 audiopipe apcl 1800 watt amp and plan on running another amp if I can put all 4 in my truck any advice is greatly appreciated. I can go 55" wide, 16" deep, 9" tall in the front and 6" on the rear. Link to comment Share on other sites More sharing options...
ehall8702 Posted June 15, 2019 Report Share Posted June 15, 2019 I'm after the same thing, have 4 hds2.108s , didn't have patients to start an underseat box yet, but ended up with 4 cubes ( 3 net, port almost 1) that sits ON the seat cause I couldn't wait . Curios to see if u get good results because that's my next battle. My truck is a 97 tho but similar size 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz Link to comment Share on other sites More sharing options...
Tribe Called Bass Posted June 16, 2019 Report Share Posted June 16, 2019 you sure can! I have a 2015 chevy silverado LTZ with bose(Bose amp on back wall as well as the electric window regulator) Gately box, 2.5" seat lift, 4 sundown 8's, sundown scv 3k, sundown 50.4, b2 audio ref 4 channel, 3 smd distro blocks, rca distro box and a lc7i. I was able to fit all of that shit with room to run wires. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.