Triticum Agricolam Posted June 22, 2019 Report Share Posted June 22, 2019 Here is what I would do. Sub up, port back. "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
Dragonsyph Posted June 22, 2019 Author Report Share Posted June 22, 2019 I really appreciate the work, but the sub it self is over 15" in depth, so if i reading that right it wont fit? Also if i have a 25 SSF wont 32hz tuning be to high and unload at higher watts? ♦ Sundown NSV4 18" + Sundown SALT-4 Baby ♦ MechMan Elite 370a + XS3100 - XP3000 ♦ SHCA 1/0 OFC(blue) + SMD Fuse Holders(blue) ♦ Pioneer AVH-2440NEX + SHCA Pro RCA Link to comment Share on other sites More sharing options...
Triticum Agricolam Posted June 22, 2019 Report Share Posted June 22, 2019 6 hours ago, Dragonsyph said: I really appreciate the work, but the sub it self is over 15" in depth, so if i reading that right it wont fit? Also if i have a 25 SSF wont 32hz tuning be to high and unload at higher watts? I hadn't considered that the sub was over 15" tall. Thanks for catching that. It actually would still fit, but there would only be .5" of clearance between the back of the motor and the bottom panel. Ideally we would have at least 1". Your subsonic filter will be just fine. Typically you set the subsonic filter to a half octave below the tuning frequency. A half octave below 32 hz is 24 Hz. Generally your actual tuning comes out a bit lower than Torres predicts anyway. I redid the design to make it a 1/2" taller for proper clearance behind your sub. "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
Dragonsyph Posted June 25, 2019 Author Report Share Posted June 25, 2019 Thanks a ton bro, gonna buy lumber this weekend. Had to order an d3400 because the 3100 would t fit in front so I’m out of cash tell them lol. ♦ Sundown NSV4 18" + Sundown SALT-4 Baby ♦ MechMan Elite 370a + XS3100 - XP3000 ♦ SHCA 1/0 OFC(blue) + SMD Fuse Holders(blue) ♦ Pioneer AVH-2440NEX + SHCA Pro RCA Link to comment Share on other sites More sharing options...
image91 Posted June 25, 2019 Report Share Posted June 25, 2019 Know that struggle. Happens to a lot of people i know. Even happened to me when i was trying to fit a bigger group battery in the engine bay =( Ended up with similar 7x AH. lol Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.