Sparky99 Posted June 27, 2019 Report Share Posted June 27, 2019 Center console build for a single cab truck, running on 1,00 watts I wanna go more towards pvc then a slot port, but also open to 4th order enclosure plans. I don't know which way the port should hit to hit harder, rn I just have a slot port box that I built subwoofer and port facing the roof.. I had an ssa evil 12 in a similar box plan (just bigger) on a vfl450.1.. subwoofer ripped from the inside out so now I'm trying to just settle for something much smaller but it still hit as hard as It can. Please help !! Link to comment Share on other sites More sharing options...
ToNasty Posted June 27, 2019 Report Share Posted June 27, 2019 Im doing the same thing in my regular cab now. Im doing sub firing back and port forward under the dash ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Sparky99 Posted June 28, 2019 Author Report Share Posted June 28, 2019 are you using pvc? Link to comment Share on other sites More sharing options...
ToNasty Posted June 28, 2019 Report Share Posted June 28, 2019 1 hour ago, Sparky99 said: are you using pvc? No. Because of space under the dash ill be doing a slot port ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Sparky99 Posted June 28, 2019 Author Report Share Posted June 28, 2019 I made a design for 2 2inch pvc pipes facing to the back of the cab and the subwoofer facing up.. .75 cubes 33 hz 17.1 Port length Ill more then likely just build that box and see how it turns out, but im just turning towards people that might of had a 4th order design I could use or a different box plan with pvc. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.