Joshdashef Posted August 7, 2019 Report Share Posted August 7, 2019 Currently run a pair of sundown SA12s off a dc 2k and a RF P600x4 on a set of t1 components. My voltage stays around 13.8-14.2 unless I’m dipping into a really hard song then it gets down to around 13.3 ish and jumps back up to 13.8-14.2. I have a mechman 240A two runs of 1/0 from front battery to rear front battery xs power d5100R rear battery d3400 around 125ah of xs power I think Upgrading to a Fi sp4v2 15 on a AAK 4000.1D or the 5500 variant. Would this be overkill? https://www.down4soundshop.com/SB1260-31/ Im thinking of running this next to the D3400 or grabbing another d3400 or selling the d3400 to grab a group 31 daily driver if that matters. Appreciate any input you guys have and any personal experience SMD Tool Map (2022): https://www.stevemeadedesigns.com/board/topic/220267-smd-tool-map-2022/ My Port Size Calculator (in progress): https://www.stevemeadedesigns.com/board/topic/217087-port-size-calculator-in-progress/ Common Port Walls for a Slot Port: https://www.stevemeadedesigns.com/board/topic/217076-common-port-walls-why-it-matters-to-your-box/?tab=comments#comment-3240313 Link to comment Share on other sites More sharing options...
Joshdashef Posted August 8, 2019 Author Report Share Posted August 8, 2019 Bump SMD Tool Map (2022): https://www.stevemeadedesigns.com/board/topic/220267-smd-tool-map-2022/ My Port Size Calculator (in progress): https://www.stevemeadedesigns.com/board/topic/217087-port-size-calculator-in-progress/ Common Port Walls for a Slot Port: https://www.stevemeadedesigns.com/board/topic/217076-common-port-walls-why-it-matters-to-your-box/?tab=comments#comment-3240313 Link to comment Share on other sites More sharing options...
SnowDrifter Posted August 8, 2019 Report Share Posted August 8, 2019 No such thing as overkill in electrical With that said, for over 800 bucks, I think you might see more benefit dollar per dollar from getting a larger alt ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Soccerballzs Posted August 8, 2019 Report Share Posted August 8, 2019 True a 320 amp alternator 1st. http://www.stevemeadedesigns.com/board/garage/vehicle/2438-jeep-commander/I Pioneer P99RSAmpere 38002-Ampere 125/44-6.5 inch Hertz HSK XL Mids4-8 inch JL Audio ZR Midwoofer 2-5.25 Satori Mids2-Morel Tweeters, 2 Hertz Milles 3 inch on A pillars2-Hertz Silk tweeters DC Audio Level 5/12 Skyhigh Wire Mechman 320 XS Power D3100MO Funniest Thread of the Year 2013: http://www.stevemead...dy-being-a-pos/ Link to comment Share on other sites More sharing options...
Joshdashef Posted August 8, 2019 Author Report Share Posted August 8, 2019 3 hours ago, SnowDrifter said: No such thing as overkill in electrical With that said, for over 800 bucks, I think you might see more benefit dollar per dollar from getting a larger alt 1 hour ago, Soccerballzs said: True a 320 amp alternator 1st. Last I checked Mechman only made up to a 240a for my civic sadly would I see any benefit to adding the smaller capacitor they have of 500F for around 450$ Versus just adding more regular AGMs with my current 240a alt? (In a daily ride not a burp) so with a 4K/5k total system 240a alt, how many ah of AGM would be a good starting point ? 250 or 300? Or something else with supercaps ? SMD Tool Map (2022): https://www.stevemeadedesigns.com/board/topic/220267-smd-tool-map-2022/ My Port Size Calculator (in progress): https://www.stevemeadedesigns.com/board/topic/217087-port-size-calculator-in-progress/ Common Port Walls for a Slot Port: https://www.stevemeadedesigns.com/board/topic/217076-common-port-walls-why-it-matters-to-your-box/?tab=comments#comment-3240313 Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 8, 2019 Report Share Posted August 8, 2019 You sure your pulling max from the alt? Clamped it ? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Joshdashef Posted August 9, 2019 Author Report Share Posted August 9, 2019 4 hours ago, Kyblack76 said: You sure your pulling max from the alt? Clamped it ? Haven’t clamped it. It’s possible I’m not, between the eld bs and the belt never being quite right ... SMD Tool Map (2022): https://www.stevemeadedesigns.com/board/topic/220267-smd-tool-map-2022/ My Port Size Calculator (in progress): https://www.stevemeadedesigns.com/board/topic/217087-port-size-calculator-in-progress/ Common Port Walls for a Slot Port: https://www.stevemeadedesigns.com/board/topic/217076-common-port-walls-why-it-matters-to-your-box/?tab=comments#comment-3240313 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.