Maebros Posted August 9, 2019 Report Share Posted August 9, 2019 So I have a 270amp Mechman alt for my RAV4 that never got installed. I totalled it a few years ago but I still have the alt. Any way I could build or buy a bracket or something to fit it into my Jeep now.? HU: Pioneer AVH x5800BHS SP Amp: AQ 120.4 Front SP: Hertz Hsk 165 Rear SP: DD cxs 6.5 SW Amp: Crescendo BC2000d SW 2 DC level 3 12" Electrical: Stock alt for now XS D2400 XS D3400 Knukonceptz Kolossus Second skin damplifier On 8/8/2012 at 4:50 PM, Brandon15zzz said: I heard he actually graduated college with a 4.0 gpa. Seems pretty gangster. On 8/29/2012 at 12:25 AM, ILoveBass21 said: he could blow a sub powering it with a potato. Link to comment Share on other sites More sharing options...
SnowDrifter Posted August 9, 2019 Report Share Posted August 9, 2019 Hey welcome back! Maybe? You'd need a bracket that both allows it to fit space wise, and provides the same alignment of the pulley. Pulley would also need to be compatible regarding number of grooves. Then there's the wiring bit, which varies from car to car. Assuming thr regulator tech used is the same, and the charge warning light tech is the same then imyou could make an adapter plug I'd shoot mechman a note and see what the cost of recasing the thing is ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.