SasquatchREG32 Posted October 25, 2019 Report Share Posted October 25, 2019 I have a T1500 that get hot to the touch. I did big 4 and all wires are 0g/ofc. At first I thought it was hot from playing but one time I took out the subs for a road trip and when I touched the amp it was hot. Cant think of what would cause the amp to get hot. Any help would be greatly appreciated. Link to comment Share on other sites More sharing options...
ToNasty Posted October 25, 2019 Report Share Posted October 25, 2019 If this is the bdcp the deal with it I have never seen one of those amps not get hot ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
SasquatchREG32 Posted October 25, 2019 Author Report Share Posted October 25, 2019 I think it's a bdcp. I'm guessing it's normal?? Link to comment Share on other sites More sharing options...
ToNasty Posted October 25, 2019 Report Share Posted October 25, 2019 Normal from what I've seen with them ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
PC Principal Posted October 25, 2019 Report Share Posted October 25, 2019 I think its normal. I have the T1000 BDCP running at 4 ohm and it gets very hot, but never overheats. 2007 Toyota FJ Cruiser RF Power T1000 BDCP RF Punch 400-4 2 P2D4 12's Link to comment Share on other sites More sharing options...
AaronT Posted October 25, 2019 Report Share Posted October 25, 2019 It's what they are supposed to do. Large heat sink to transfer heat Link to comment Share on other sites More sharing options...
SasquatchREG32 Posted October 26, 2019 Author Report Share Posted October 26, 2019 Cool. Thanks guys Link to comment Share on other sites More sharing options...
Joshdashef Posted October 26, 2019 Report Share Posted October 26, 2019 If your worried wire a fan to help the heat sink dissipate heat SMD Tool Map (2022): https://www.stevemeadedesigns.com/board/topic/220267-smd-tool-map-2022/ My Port Size Calculator (in progress): https://www.stevemeadedesigns.com/board/topic/217087-port-size-calculator-in-progress/ Common Port Walls for a Slot Port: https://www.stevemeadedesigns.com/board/topic/217076-common-port-walls-why-it-matters-to-your-box/?tab=comments#comment-3240313 Link to comment Share on other sites More sharing options...
BassMunky Posted October 26, 2019 Report Share Posted October 26, 2019 Dry ice lol Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.