Bhaazaher Posted November 18, 2019 Report Share Posted November 18, 2019 Hello everyone. so i am searching over the internet for some decent components that will match my system but i am a bit confused now.. so at the moment i am using Morel virtus 602 components with JBL GTO19T tweeters(i fried the morel ones and replaced them with the jbl) as for the amp i am using audison SR4 (currently using 4 ch but willing to go for 2ch) the amp gives in 2 ch 175W X 2 @ 4 OHM Running a 1000 RMS DC AUDIO level 3 sub so i am looking for components that will match the system and the amp + people are suggesting that i should add 6/9 speakers and i dont think its a good idea since i have a kia rio sedan and i dont have 6/9 in the rear what should i do? get another components put them on the rear on 4ch get a better components and run them on 2ch or go for the 6/9 in the rear? Thank you all for your time Link to comment Share on other sites More sharing options...
bcbrassard Posted November 18, 2019 Report Share Posted November 18, 2019 what does the amp put out for wattage in 4 ch mode? What the rms ratings of the Morels? Link to comment Share on other sites More sharing options...
bcbrassard Posted November 18, 2019 Report Share Posted November 18, 2019 What is the issue w/ the speakers you have now? Not loud enough? Not enough mid-bass? What are you goals. Link to comment Share on other sites More sharing options...
Bhaazaher Posted November 18, 2019 Author Report Share Posted November 18, 2019 4 ch @ 4 ohm = 65W RMS X 4 4ch @ 2 ohm = 90W RMS X4 the morel = 140 watts RMS (300 watts peak power) Link to comment Share on other sites More sharing options...
Bhaazaher Posted November 18, 2019 Author Report Share Posted November 18, 2019 yeah they are not loud enough.. and people are saying if i connect them in 2ch i`ll fry them up Link to comment Share on other sites More sharing options...
bcbrassard Posted November 18, 2019 Report Share Posted November 18, 2019 Your not putting enough power to your components. 2 ch would be fine but you would need to set your gains properly and you would be fine. If you set them by ear then you would probably have distortion and could blow the speakers. Link to comment Share on other sites More sharing options...
bcbrassard Posted November 18, 2019 Report Share Posted November 18, 2019 What head unit are you running? stock? aftermarket? Link to comment Share on other sites More sharing options...
bcbrassard Posted November 18, 2019 Report Share Posted November 18, 2019 You could sell that amp and get a 2 ch with more power or a 4 ch with more power? Link to comment Share on other sites More sharing options...
Bhaazaher Posted November 18, 2019 Author Report Share Posted November 18, 2019 an aftermarket headunit.. its a jvc kw-v21bt and for the amp i guess it produce enough power.. as you can reach 350W RMS for a pair in 2ch @ 4 ohm the problem i can't find a decent components that can handle that RMS Link to comment Share on other sites More sharing options...
bcbrassard Posted November 18, 2019 Report Share Posted November 18, 2019 27 minutes ago, Bhaazaher said: 4 ch @ 4 ohm = 65W RMS X 4 4ch @ 2 ohm = 90W RMS X4 the morel = 140 watts RMS (300 watts peak power) Is this the amp ratings? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.