Jump to content
Second Skin Audio

Needing Enclosure Help Please


Recommended Posts

Trying to build a box for a Charger trunk. 2- 15” hippoxl. The build sheet they give out does not really match what the cubic ft for ported box should be. The subs require 4.75 cubic ft each, yet in the dual ported box are saying 6.03 cubic ft together? Not sure how that math works out. Any help is appreciated.   
 

CAR: 2006 Charger SRT8 
 

SUBS: HIPPOXL 152R

Link to comment
Share on other sites

  • 2 weeks later...
On 1/11/2020 at 10:20 PM, Redbeardoriginal said:

Trying to build a box for a Charger trunk. 2- 15” hippoxl. The build sheet they give out does not really match what the cubic ft for ported box should be. The subs require 4.75 cubic ft each, yet in the dual ported box are saying 6.03 cubic ft together? Not sure how that math works out. Any help is appreciated.   
 

CAR: 2006 Charger SRT8 
 

SUBS: HIPPOXL 152R

Think u are misreading somewhere or looking at a different model on accident. 9.5 cubes optimal for 2 and 7.8 cubes small for 2 

HIPPOXL_R_Manual_V2.pdf

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

On 1/11/2020 at 10:20 PM, Redbeardoriginal said:

Trying to build a box for a Charger trunk. 2- 15” hippoxl. The build sheet they give out does not really match what the cubic ft for ported box should be. The subs require 4.75 cubic ft each, yet in the dual ported box are saying 6.03 cubic ft together? Not sure how that math works out. Any help is appreciated.   
 

CAR: 2006 Charger SRT8 
 

SUBS: HIPPOXL 152R

 

Screenshot_20200123-203607.png

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...