xdq2x Posted January 17, 2020 Report Share Posted January 17, 2020 I’m wanting to get two sets of the SPX-65C, so ill have 4 woofers and 4 tweeters.... I’m trying to understand this rms for them, it says 200 watts rms (pair) so does that mean i can put 200 watts rms into the crossover for both the woofer and tweeter? So i was thinking about getting a RP-150.4AB one channel to each crossover and then from the crossover to the tweeter and woofer. Would this work? Link to comment Share on other sites More sharing options...
BassMunky Posted January 17, 2020 Report Share Posted January 17, 2020 cheeee Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported Link to comment Share on other sites More sharing options...
xdq2x Posted January 17, 2020 Author Report Share Posted January 17, 2020 12 minutes ago, BassMunky said: cheeee What? Link to comment Share on other sites More sharing options...
AaronT Posted January 17, 2020 Report Share Posted January 17, 2020 Yes that amplifier will work perfectly fine for those components Link to comment Share on other sites More sharing options...
AaronT Posted January 17, 2020 Report Share Posted January 17, 2020 They're talking about 200 Watts RMS / pair which means both left and right side each sec left and right side is 50 Watts RMS 100 Watts peak it's not meaning the tweeters 100 watts in the woofer is 100 Watts it's saying that the pair one woofer and one Tweeter can take 100 Watts RMS into that crossover so yes the amplifier you have is fine it'll provide a little bit of head room Link to comment Share on other sites More sharing options...
xdq2x Posted January 17, 2020 Author Report Share Posted January 17, 2020 3 hours ago, AaronT said: They're talking about 200 Watts RMS / pair which means both left and right side each sec left and right side is 50 Watts RMS 100 Watts peak it's not meaning the tweeters 100 watts in the woofer is 100 Watts it's saying that the pair one woofer and one Tweeter can take 100 Watts RMS into that crossover so yes the amplifier you have is fine it'll provide a little bit of head room Gotcha, thank you Link to comment Share on other sites More sharing options...
xdq2x Posted January 17, 2020 Author Report Share Posted January 17, 2020 3 hours ago, AaronT said: Yes that amplifier will work perfectly fine for those components Thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.