Loslegend Posted February 9, 2020 Report Share Posted February 9, 2020 I have 2 doc 4 ohm subwoofers,they are wired in parallel to 1 ohm on a 2400.1d quantum audio extreme mono block(not really that much wattage)the wire is not ran into the other sub they are connected at the terminal cup,but the problem is my subwoofer furthest away from the terminal cup is moving less than the other one wich I know affects spl,I check all voice coils they still read one ohm and they are all still wired up correctly,any ideas??? Link to comment Share on other sites More sharing options...
zxsonnyxz Posted June 21, 2020 Report Share Posted June 21, 2020 Are you 100% sure on the wiring? What woofers and how is your box? Some woofers handle uneven loading in the box quite poorly, others seem to overcome it really well. So if your box in unsymetrical that might be a reason. STD Passat Build 151db+STD Omega BuildMitsubishi Colt Build - Alpine|Focal|PeerlessHome Stereo BuildSmall Tang Band build - 4" fullrangeBox for 4 8"My Saab 9000 Build- I'd be very happy if you cared to check out the logs and give feedback! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.