ehall8702 Posted March 31, 2020 Author Report Share Posted March 31, 2020 FINALY GOT HER IN!!!!! Took Astro glide damn near but she is in finally. Haven't ran my new power wire so just cause I'm impatient and have gain jut under 1/4 and a 250a fuse on it and it just absolutely slams! Roof ripples , bed sides shake, just a monster! Played it for about 30 minutes up pretty high and no stink from the subs 🤗 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz Link to comment Share on other sites More sharing options...
bmwking Posted March 31, 2020 Report Share Posted March 31, 2020 fuck yeah man, looks good! Link to comment Share on other sites More sharing options...
ehall8702 Posted March 31, 2020 Author Report Share Posted March 31, 2020 Impatient need new power wire ran and put my interior back in but HAD to hear it! Video does no justice, seat does waves and seats side to side. Gain is way low and headunit volume is about half of it's clean volume level. First two song I had available, usually run Bluetooth but can't stream and record from same phone lol. 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz Link to comment Share on other sites More sharing options...
bmwking Posted March 31, 2020 Report Share Posted March 31, 2020 probably low on the list, but make sure you give it a good vacuum while you have most of the interior out, will give a new sense of pride knowing you got to clean areas that you normally cant Link to comment Share on other sites More sharing options...
ehall8702 Posted March 31, 2020 Author Report Share Posted March 31, 2020 5 minutes ago, bmwking said: probably low on the list, but make sure you give it a good vacuum while you have most of the interior out, will give a new sense of pride knowing you got to clean areas that you normally cant Oh yeah it high on the list, used to have a kid work for me that vacuumed everything as I was installing but now I have to do it all myself lol. My truck needs more than a vacuum trust that. 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz Link to comment Share on other sites More sharing options...
bmwking Posted March 31, 2020 Report Share Posted March 31, 2020 1 minute ago, ehall8702 said: Oh yeah it high on the list, used to have a kid work for me that vacuumed everything as I was installing but now I have to do it all myself lol. My truck needs more than a vacuum trust that. lol hey i didnt want to sound like i was criticizing or anything, but yeah that thing needs a good cleanin Link to comment Share on other sites More sharing options...
ehall8702 Posted March 31, 2020 Author Report Share Posted March 31, 2020 9 minutes ago, bmwking said: lol hey i didnt want to sound like i was criticizing or anything, but yeah that thing needs a good cleanin I have a Huge Garage but it's dirt floor so I tracked a TON if shit in working on it...it's NASTY! LOL 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz Link to comment Share on other sites More sharing options...
ehall8702 Posted March 31, 2020 Author Report Share Posted March 31, 2020 27 minutes ago, Gunnem said: 3 more subs and a wall please please Man u don't know how bad I wanted to! I was gonna get 4 18s and wall but I'm a big boy, gotta get my gangster lean on and couldn't do it with a wall, even was thinking clamshell style and still wouldn't have let me recline lol. 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz Link to comment Share on other sites More sharing options...
ehall8702 Posted March 31, 2020 Author Report Share Posted March 31, 2020 @Gunnem you buy me 3 more 15s and another 8k and I PROMISE a wall....sound like Trump now huh? Lol 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz Link to comment Share on other sites More sharing options...
ehall8702 Posted March 31, 2020 Author Report Share Posted March 31, 2020 19 minutes ago, Gunnem said: never heard someone say im too big and i have to lean as a reason for not having a wall in extended cab i have seen a 6 foot 5 inch dude jump out of an extended cab dodge with 3 alts and 20,000 watts on 4 fi audio 15 sp4s he told me he leans into the port Original idea was to have a package tray ontop of the box but then my gf did a big piece if artwork on there and now won't put anything on it now...I think she would kill me if I walled it off anyways. And I never thought about leaning in the port tho mine is on passenger side ! 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.