TheMusicBox Posted February 26, 2020 Report Share Posted February 26, 2020 Single zvx 15 d2 wired to 1 ohm Amplifier is a skar rp2000.1 Agm battery up front and in the back Set the gain via MM @ 44.72 volts Any ideas? Only thing I have not ruled out is the enclosure. Size is 15.75-H. 22-D. 35-W Port is 3.75-W. 14.25-H 25-L Double baffle I feel that the excursion could be the issue, the smell only occurs on frequencies lower then 38 or so. Link to comment Share on other sites More sharing options...
TheMusicBox Posted February 26, 2020 Author Report Share Posted February 26, 2020 Link to comment Share on other sites More sharing options...
TheMusicBox Posted February 26, 2020 Author Report Share Posted February 26, 2020 This seams to be to short. But I'm no expert what so ever on enclosure building. Link to comment Share on other sites More sharing options...
TheMusicBox Posted February 26, 2020 Author Report Share Posted February 26, 2020 I calculated the enclosure volume is 4.25^ after displacement and port area. Skar calls for 4.0^,so that means this is .25 to big also. Link to comment Share on other sites More sharing options...
MichiganBumps Posted February 26, 2020 Report Share Posted February 26, 2020 are u clipping? box is fine, really good actually. the sq area of port might be choking it off a smidge but wouldnt think that'd be a huge issue. i will say this, from prefab with a small port, to the bigger box i have now, and large port area, mine dont do this no more and can tell it wants more power. just my experience. old box was choking off the sub big time. 15" Neo Elite 135AH Lithium Bank Taramps Bass30k 320a Brand X Purple Metallic Ho Alt 125+ Ft of oversized 1/0 Link to comment Share on other sites More sharing options...
slowfkncar Posted February 26, 2020 Report Share Posted February 26, 2020 You might just be clipping, I've had some Rp's before and they aren't hard to clip at all. Yes the enclosure is slightly on the large size if its 3/4" but that would only make your woofer play more efficiently. Link to comment Share on other sites More sharing options...
TheMusicBox Posted February 26, 2020 Author Report Share Posted February 26, 2020 So I will reset my gain on the amplifier and try again Thank you for the input. Link to comment Share on other sites More sharing options...
TheMusicBox Posted February 26, 2020 Author Report Share Posted February 26, 2020 As far as clipping yes I was clipping pretty good but I set the gains after and it was alot better. But I know I'm still getting a little clipping still. I was not sure if the clipping could be anything else other then the amplifier. Link to comment Share on other sites More sharing options...
MichiganBumps Posted February 26, 2020 Report Share Posted February 26, 2020 1 minute ago, TheMusicBox said: As far as clipping yes I was clipping pretty good but I set the gains after and it was alot better. But I know I'm still getting a little clipping still. I was not sure if the clipping could be anything else other then the amplifier. bad connections, voltage drop can cause those issues to im pretty sure 15" Neo Elite 135AH Lithium Bank Taramps Bass30k 320a Brand X Purple Metallic Ho Alt 125+ Ft of oversized 1/0 Link to comment Share on other sites More sharing options...
TheMusicBox Posted February 26, 2020 Author Report Share Posted February 26, 2020 I just re wired all connections and upgraded wires voltage drop was about 13.4v from 14.5 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.