Rutherk1 Posted March 10, 2020 Report Share Posted March 10, 2020 Greetings everyone. I watch the Steve Meads videos all the time. Thought someone may be of help over here. Where are people getting audio signal on these 2020 Fords (SuperDuty). Ford changed the wire colors on the ACM as well as the connector design going into the ACM so PAC and Metra solutions won’t work. Colors aren’t the same so I can’t make my own. Anyone have any experience with these? This is a non B&O system. Thaaaaaaaaanks \m/ Link to comment Share on other sites More sharing options...
reedal Posted March 11, 2020 Report Share Posted March 11, 2020 Can you check continuity between the connector(s) on the back of the HU to the wires going to the speakers? Or you could ask the shop at the dealership for a print out of the diagrams SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Rutherk1 Posted March 11, 2020 Author Report Share Posted March 11, 2020 1 hour ago, reedal said: Can you check continuity between the connector(s) on the back of the HU to the wires going to the speakers? Or you could ask the shop at the dealership for a print out of the diagrams Thanks for the reply. I thought about. You are right. That may be my best bet. Link to comment Share on other sites More sharing options...
Rutherk1 Posted March 23, 2020 Author Report Share Posted March 23, 2020 On 3/11/2020 at 7:44 AM, Rutherk1 said: Thanks for the reply. I thought about. You are right. That may be my best bet. Pinout for 2020 connector incase anyone stumbles on this. Soldered in, Tessa taped and ready to go. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.