CommonSyns Posted March 21, 2020 Author Report Share Posted March 21, 2020 I didn't mention it but I have a DEH-80PRS as my deck. So I am not totally sure that I will need the DSP integrated into the amplifier. How are Taramps? I thought that somewhere in the past they had overheating issues. But this was back when I was actually looking for car audio, back in 2013. Granted that my knowledge is from 2013 so I would think that everything would be sorted out. I plan to put both amps under my bench rear seat, so ideally they would need to be small enough to fit under the seat, yet not stick out, I'll get some dimensions for the rear seat of my TJ. Thank you for replying. Skar Audio SDR 10" x2 (Sealed Box) Skar Audio 1500.1D (1 Ohm) x1 Skar Audio TX525c (Front with dash tweeter) x1 Kenwood Excelon KFC-X173 (Rear Coax) x1 JL Audio 360.4 (Mids & Highs Amp) x1 DEH80-PRS XS Power d3400 Singer Alternator 275A 98 Jeep TJ 4.0 5 Speed Link to comment Share on other sites More sharing options...
AaronT Posted March 22, 2020 Report Share Posted March 22, 2020 Go with the mini power series amps from Rockford. They have better cooling and are more efficient Link to comment Share on other sites More sharing options...
CommonSyns Posted April 17, 2020 Author Report Share Posted April 17, 2020 Can I request more recommendations please? Skar Audio SDR 10" x2 (Sealed Box) Skar Audio 1500.1D (1 Ohm) x1 Skar Audio TX525c (Front with dash tweeter) x1 Kenwood Excelon KFC-X173 (Rear Coax) x1 JL Audio 360.4 (Mids & Highs Amp) x1 DEH80-PRS XS Power d3400 Singer Alternator 275A 98 Jeep TJ 4.0 5 Speed Link to comment Share on other sites More sharing options...
CommonSyns Posted April 30, 2020 Author Report Share Posted April 30, 2020 Anyone? Skar Audio SDR 10" x2 (Sealed Box) Skar Audio 1500.1D (1 Ohm) x1 Skar Audio TX525c (Front with dash tweeter) x1 Kenwood Excelon KFC-X173 (Rear Coax) x1 JL Audio 360.4 (Mids & Highs Amp) x1 DEH80-PRS XS Power d3400 Singer Alternator 275A 98 Jeep TJ 4.0 5 Speed Link to comment Share on other sites More sharing options...
SkarredSierra Posted April 30, 2020 Report Share Posted April 30, 2020 Taramps is about the only thing that small making that power. They have a small 4 channel too. You could always buy one of the alpine or jbl mini 4 channel amps that fit up under your dash or other tight places and relocate your 4 channel. That might give room to turn your bass amp sideways so it runs parallel to the rear seat and doesnt stick out. Link to comment Share on other sites More sharing options...
deathcards Posted April 30, 2020 Report Share Posted April 30, 2020 anyone hear anything on sundown SFB series seems to be in his size range but haven't heard anything on them to give a recommendation. skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps Link to comment Share on other sites More sharing options...
Joshdashef Posted April 30, 2020 Report Share Posted April 30, 2020 On 3/21/2020 at 1:36 PM, CommonSyns said: Right now I have a JL Audio JX360/4 dimensions: 15-1/2"L x 7-3/4"W x 2-1/8"H and a Skar Audio 1500.1v1 Dimensions: 13.75" (Length) x 9.15" (Width) x 2.5" (Height) The Skar is set a 1 Ohm so it is drawing 1500 RMS or so. I would like to keep that kind of power with a smaller footprint. The JL Audio is nice but has a big footprint for what I want it for. As for power for the JL I want about 100 RMS x4 @ 4 Ohm. All while keeping a small footprint, if possible. Dc 1.2k has these dimensions. Could you fit another 2.75” in length? I never had any problems with my dc 2k Heatsink Length 16.5" (419mm) Heatsink Width 9.38" (238mm) Heatsink Height 2.35" (59.6mm) SMD Tool Map (2022): https://www.stevemeadedesigns.com/board/topic/220267-smd-tool-map-2022/ My Port Size Calculator (in progress): https://www.stevemeadedesigns.com/board/topic/217087-port-size-calculator-in-progress/ Common Port Walls for a Slot Port: https://www.stevemeadedesigns.com/board/topic/217076-common-port-walls-why-it-matters-to-your-box/?tab=comments#comment-3240313 Link to comment Share on other sites More sharing options...
CommonSyns Posted May 2, 2020 Author Report Share Posted May 2, 2020 On 4/30/2020 at 3:25 PM, Joshdashef said: Dc 1.2k has these dimensions. Could you fit another 2.75” in length? I never had any problems with my dc 2k Heatsink Length 16.5" (419mm) Heatsink Width 9.38" (238mm) Heatsink Height 2.35" (59.6mm) I'm tryi g to get a smaller Amp so I can hide it under my rear bench seat. Another 2.75" would incense my problem. Anyone try the alpine pdx amps? They look like they would fix the problem I have. I just know nothing about them. Skar Audio SDR 10" x2 (Sealed Box) Skar Audio 1500.1D (1 Ohm) x1 Skar Audio TX525c (Front with dash tweeter) x1 Kenwood Excelon KFC-X173 (Rear Coax) x1 JL Audio 360.4 (Mids & Highs Amp) x1 DEH80-PRS XS Power d3400 Singer Alternator 275A 98 Jeep TJ 4.0 5 Speed Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.