Jump to content

Recommended Posts

And the picture of the vinyl graphic being made

Screenshot_20200714-205049.png

Singer 250amp Alt, Singer PCM bypass harness

Titan8 Lithium Underhood safe BCI PWR-S5

Big 3 W/ dual runs of power/ground. All 1/0awg OFC

SounDigital EVO 5K amp, Two 15" Fi SSD subs

Next Level Fabrication @ 7 cubes net, tuned to 32HZ 

Link to comment
Share on other sites

The only thing you need to boost voltage is a 1N4004 diode. Connect it to the sense wire on your alternator. Go from 14.8 to 15.3. You can do that on your factory alternator too. If you use more than 1 connected in series then you have to use a relay so it doesn’t constantly drain from your battery. Only using 1 diode would cause a drain because of the way it’s designed but one a second one or more is in the mix in series then that creates a constant drain of a relay and cut on switch isn’t incorporated in the circuit. 

:stupid:“How can we help you?”
:guido:
“And don’t forget to tell them that 
the customer isn’t always right.”

Link to comment
Share on other sites

The sense wire is the wire that always reads battery voltage even when the vehicle is off and the excite wire is the wire that only reads when the ignition is on. So sense is a constant wire and excite is an ignition wire. 

:stupid:“How can we help you?”
:guido:
“And don’t forget to tell them that 
the customer isn’t always right.”

Link to comment
Share on other sites

I gotcha... But I already ordered this, it's completely plug and play and is designed for Toyota/Lexus vehicles.

 

It probably just does the same thing in a fancy package LOL

Screenshot_20200714-224341.png

Singer 250amp Alt, Singer PCM bypass harness

Titan8 Lithium Underhood safe BCI PWR-S5

Big 3 W/ dual runs of power/ground. All 1/0awg OFC

SounDigital EVO 5K amp, Two 15" Fi SSD subs

Next Level Fabrication @ 7 cubes net, tuned to 32HZ 

Link to comment
Share on other sites

This is the same voltage booster that Steve Meade used in his Lexus.

 

 

Singer 250amp Alt, Singer PCM bypass harness

Titan8 Lithium Underhood safe BCI PWR-S5

Big 3 W/ dual runs of power/ground. All 1/0awg OFC

SounDigital EVO 5K amp, Two 15" Fi SSD subs

Next Level Fabrication @ 7 cubes net, tuned to 32HZ 

Link to comment
Share on other sites

I love my box, just wasn't a fan of how big the D4S logo and website was on it, especially right in the middle of the window.. So I had a printing shop make me a vinyl decal to cover the plexiglass. Won't be everyone's style but I love it.

 

My cheap 80 dollar phone doesn't take great pictures... Caught hell trying to get a picture without any glare or reflections... But it looks even more "gooder" in person. 

 

Would of been cool to get a Reaper holding a couple subwoofers up with veins and stuff hanging out the bottom... But apparently that image doesn't exist :D

 

 

 

 

Well... Guess I can't upload any more pictures unless they're only like 1MB... That sucks. I had to reduce these pictures size and quality even lower than they already were... 

Screenshot_20200715-115612.png

Screenshot_20200715-115638.png

Singer 250amp Alt, Singer PCM bypass harness

Titan8 Lithium Underhood safe BCI PWR-S5

Big 3 W/ dual runs of power/ground. All 1/0awg OFC

SounDigital EVO 5K amp, Two 15" Fi SSD subs

Next Level Fabrication @ 7 cubes net, tuned to 32HZ 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 1027 Guests (See full list)

×
×
  • Create New...