Jump to content
Second Skin Audio

T-line design


ehall8702

Recommended Posts

So I ordered a nvx 12 for a customer, and eBay sent me a nvx 8. Long story short I got a refund and got to keep the 8. Want to try and build a t-line for the 8 to out in my garage/shop. Shop is 1800 sq ft with 25' tall ceilings, hopefully a single 8 in a t-line will be enuff to have sum bass fill for the shop stereo. Sub has low rms, so probably gonna buy a plate amp. Not opposed to a bandpass either if someone thinks it'll have better output.  Where do I start to even get a basis to design a t-line? Pic of sun model in pic

KIMG0489.JPG

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

28 minutes ago, CstrokerV said:

Uhhhh maybe look at the pinned tline topic you started this thread in lol

Man I live in the sticks and use my cell so I miss alot of shit cause my phone loads like a heard if turtles in a puddle of peanut butter...will look sum more when I have better service and can read already posted topics.

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 306 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...