Jump to content

Recommended Posts

56 minutes ago, killerc998 said:

No good way to do wiring so I just ran it like that. IMG_20211010_140642.thumb.jpg.94ed62ba712683c3b386df343be68408.jpgIMG_20211010_140724.thumb.jpg.4772b978e06fbff52bf410725e528e1a.jpg

Could be worse

06 Charger

Pioneer double din

Pioneer 6.5 and 6×9's

Knukoncept Krystal kable rca's

0 ga knukoncept kolossus wire 

Big 3 same wire ^ 1 run 

8g karma ss speaker wire

Sundown sia 3500d at 1ohm

2 Sundown U series 12's

Duralast platinum agm H7 (Main)

Xs power d3400

Trying to find a ho alt

 

 

Link to comment
Share on other sites

Also ran out of 2/0 so the 2 runs from the headways to tothe  fuses are 1/0 will replace once i get more 2/0. Temco industrial that makes it is out of black. So I have to wait for them to produce some.  Each ground is ran to the frame. Got 10 frame grounds. I like to over do wiring. 

Link to comment
Share on other sites

  • 2 weeks later...
19 minutes ago, killerc998 said:

Look at the door flex NICE!!!

06 Charger

Pioneer double din

Pioneer 6.5 and 6×9's

Knukoncept Krystal kable rca's

0 ga knukoncept kolossus wire 

Big 3 same wire ^ 1 run 

8g karma ss speaker wire

Sundown sia 3500d at 1ohm

2 Sundown U series 12's

Duralast platinum agm H7 (Main)

Xs power d3400

Trying to find a ho alt

 

 

Link to comment
Share on other sites

2 hours ago, killerc998 said:

Sounds good, door gets more flex with different songs. With the lithium i hardly see below 13.8. Normally it sits about 14.2 on heavy bass songs. 

That's perfect! Good job man

2011 Chevy Silverado under construction

My build log here. Check it out! 

 

Link to comment
Share on other sites

  • 5 months later...

Decided to do front batteries delete. Use a Jim's Machineworx fuse block.  Voltage is 14.5/8 at idle. Full till it drops a volt. Got 40 more headway lifepo4. Going to add and have a total  144Ah.  All that wire. 2 runs of 2/0 welding wire from 270alt, 1 run 1/0 from 145alt to fuse block. 2 runs 2/0 to battery, one run 1/0 to the air compressors and mid/high amp. IMG_20220409_134844663_HDR.thumb.jpg.f4452e9e362d1ee3dbd0028cc3d5f027.jpg

Link to comment
Share on other sites

3 hours ago, killerc998 said:

Decided to do front batteries delete. Use a Jim's Machineworx fuse block.  Voltage is 14.5/8 at idle. Full till it drops a volt. Got 40 more headway lifepo4. Going to add and have a total  144Ah.  All that wire. 2 runs of 2/0 welding wire from 270alt, 1 run 1/0 from 145alt to fuse block. 2 runs 2/0 to battery, one run 1/0 to the air compressors and mid/high amp. IMG_20220409_134844663_HDR.thumb.jpg.f4452e9e362d1ee3dbd0028cc3d5f027.jpg

Nice! 

2011 Chevy Silverado under construction

My build log here. Check it out! 

 

Link to comment
Share on other sites

  • 2 weeks later...

So I had to replace the mid/highs amp. It's starting to go. You could listen to music loud/low and on occasion you would get no sound for a few seconds. Tried different RCAs/deck same thing. I also did a complete front batteries delete/added headway cells.  Cells were charged then connected. Since they are used from batteryhookup.com instead of being 8ah per cell they are prolly 5ah at a min, so we can say 100ah minimum. Can I play all day and voltage not drop yes. Also fuck Google photos. New phone saves everything to it. And I don't like it. 454499550_IMG_20220420_1642458002.thumb.jpg.cc29c2ad2c828429aac0113f88ae98a2.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 271 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...