Jump to content

Sub not hitting high frequencies Well


Recommended Posts

Ive got a skar evl 18 Dvc 4 ohm in a custom designed box tuned for 32hz powered by a skar rp2000 watt amp and a pioneer fh-s722bs headunit. The amp bass boost is on 0, gain half way, subsonic filter set close to 32hz. The headunits setting are untouched other than the crossover and slope for sub. When the crossover is set to anything above 31.5 hz and volume is way up the sub makes an awful noise on the higher frequency notes. Set to 31.5 hz it plays the lows like a champ though. Maybe someone can help me figure out where im going wrong. 

Link to comment
Share on other sites

What frequencies are you trying to hit with the sub? 32 hz tuning will probably roll off at 55-60hz and anything above that let the mids do their job

Team MaxRetribution

Si Vis Pacem Parabellum
Id rather be judged by 12 than carried by 6

Bowhunting- Life Begins and Ends at Full Draw

Bowhunting Team Fatal Trajectory Hunt Team

 

http://www.stevemeadedesigns.com/board/topic/49335-sick96vtecaccords-t-line-build/?hl=sick96vtecaccord << Accord Build

http://www.stevemeadedesigns.com/board/topic/68498-smokedout08impalas-tline-build/?hl=+sick96vtecaccord << Impala T-line build

 

Rebassed.com for all your music needs 👌

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 896 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...