Lilriver420 Posted September 13, 2020 Report Share Posted September 13, 2020 After removing my sub from the box and inspected the voice coil i saw that it had dust on the outside of the voice coil. Its mdf dust from sanding on the inside of the box and not cleaning out good enough. Will using a air gun be Alright to remove the dust from the voice coil itself? Link to comment Share on other sites More sharing options...
JakeW Posted September 13, 2020 Report Share Posted September 13, 2020 I’d say yes. Clean it up, and clean the box out well too. Shouldnt be any problem using light pressure just to get it cleaned off. ‘16 ram. Net Audio. Taramps. JL. DS18. Fox Acoustics. XS Power. 226.08” of DC Audio blue carbon fiber. Link to comment Share on other sites More sharing options...
SnowDrifter Posted September 13, 2020 Report Share Posted September 13, 2020 It's fine. Shoot it with some compressed air or ignore it. Don't use any liquid ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.