CFD Posted September 28, 2020 Report Share Posted September 28, 2020 Here's a bunch of videos of things I did that you can go ahead and call me an idiot about You could probably turn this into a sealed box and it might work better... or fire the ports out of the bottom into the side of the quarter panels in the trunk instead of out the front. It worked OK I think. Volume was small for these subs hence hella poly-fil. Could be good for some 10's? Whatever ya want Basically a 12" Pre-fab box because I totally fucked up. About 1.65 cu. ft. and 43 Hz tuned. Ignore the guy in the video. He's an idiot. Box for a couple 12's. Super big AF. 6.6 cu. ft. tuned to 25 Hz. The guy in the video was wrong about the air volume because he is an idiot. Video explaining on why every ported box I've ever made was wrong and how massive of a moron I am (just so you know) I'll probably post more CFD Designs in this thread as time goes on. Link to comment Share on other sites More sharing options...
CFD Posted September 28, 2020 Author Report Share Posted September 28, 2020 1.2 cu. ft. (before sub displacement) ported box for 2 6.5 inch woofers tuned to 40 Hz, again, before displacement. 4.6 cu. ft. (before sub displacement) big old big giant big port 12 inch subwoofer box tuned to 26 Hz. WinISD plot of that box with a Power Acoustik GW-124 Link to comment Share on other sites More sharing options...
CFD Posted October 16, 2020 Author Report Share Posted October 16, 2020 6th order for a Dayton Audio Ultimax 18 Link to comment Share on other sites More sharing options...
CFD Posted October 16, 2020 Author Report Share Posted October 16, 2020 Link to comment Share on other sites More sharing options...
dolbyatmos Posted October 16, 2020 Report Share Posted October 16, 2020 What would it take for you to design a box for me? I posted a forum but nobody has responded yet. Link to comment Share on other sites More sharing options...
Kocyandia Posted October 16, 2020 Report Share Posted October 16, 2020 So you were including your port volume in? Like say in winisd you were entering 2.0cuft and when you went to build included your port volume into the 2.0cuft? So in a scenario would of only had like 1.25cuft net after port displacement instead of the 2.0 you needed? Link to comment Share on other sites More sharing options...
CFD Posted October 16, 2020 Author Report Share Posted October 16, 2020 15 minutes ago, Kocyandia said: So you were including your port volume in? Like say in winisd you were entering 2.0cuft and when you went to build included your port volume into the 2.0cuft? So in a scenario would of only had like 1.25cuft net after port displacement instead of the 2.0 you needed? Yeahp. I messed that up for a long time and was left scratching my head on why my subs didn't sound exactly as expected. Figured it out recently and un-dumbassed myself. 1 hour ago, dolbyatmos said: What would it take for you to design a box for me? I posted a forum but nobody has responded yet. I designed a box for a guy for $10 but that was just cut sheets for the box. I would design it and put it on ebay. Link to comment Share on other sites More sharing options...
CFD Posted October 20, 2020 Author Report Share Posted October 20, 2020 The big stupid 12" box now with actual corners, port width corrected, less retardedness, and more brace. Actually going to build this one out of some nice oak I just picked up (and made my back sore with) and see how it womps. Link to comment Share on other sites More sharing options...
CFD Posted October 24, 2020 Author Report Share Posted October 24, 2020 Big stupid big giant big old big box for a single 12 is pretty much complete Link to comment Share on other sites More sharing options...
1point21gigawatts Posted October 24, 2020 Report Share Posted October 24, 2020 On 10/16/2020 at 2:26 AM, CFD said: Yeahp. I messed that up for a long time and was left scratching my head on why my subs didn't sound exactly as expected. Figured it out recently and un-dumbassed myself. I designed a box for a guy for $10 but that was just cut sheets for the box. I would design it and put it on ebay. It states on the title of this thread, free designs, and now you are charging people money. And when a subwoofer enclosure’s port(s) has more than one bend then it shouldn’t wrap around the subwoofer and line the inner walls of the enclosure. That decreases output a bunch. So let me understand this correctly. A guy who just learned the difference between net volume and gross volume and then thinks it’s ok to wrap a port around the inside of an enclosure is selling enclosure designs on a world renown car audio forum? “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.” Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.