XplosiveAudio Posted January 11, 2021 Report Share Posted January 11, 2021 Hi SMD Forum. I am a long time lurker first time poster! So here's the deal, I'm currently working on building out a Mazdaspeed 6 that i recently acquired at auction. My current equipment is in my signature and i know, its a mess. Basically the trunk is set for equipment as the only things i carry for work are a small tool box and customer purchased equipment. I have a cut out of peg board on the back wall of the trunk for my amps. What im shooting for is a box for maximum SPL but also SQ for 2 Skar ZVX-8" (maybe 3, havnt decided if i want to purchase the 3rd one yet). ANYWAY I am good with woodworking and have all of the required tools so im looking to see if anyone out there can make me plans for the perfect box blueprint/plans for my application. I am willing to pay via Paypal, Cash app or other available option. Please let me know if this is against the rules, if it is i apologize in advanmce. Sub Specs: 8-inch Dual 2 Ohm Voice Coil Configuration Peak Power: 1,100 Watts RMS Power: 900 Watts Competition Grade Pressed Paper Cone Stitched High Roll Foam Surround Massive Triple-Stacked Magnet 2.5" High Temperature Copper Voice Coil Motor Weight: 156 oz Frequency Response: 40 - 500 Hz Sensitivity: 80.4 dB Fs: 41.8 Hz Re: Dual 2 Ω Qms: 3.60 Qes: 1.25 Qts: 0.76 Mms: 132.0 gr Nref: 0.07% Cms: 0.02 mm/N Bl: 15.5 n/a Vas: 14.2 L Sd: 188.0 cm² Xmax: 14 mm RECOMMENDED ENCLOSURE SPECIFICATIONS Recommended Sealed Volume: 0.65 ft³ Recommended Ported Volume: 1.25 ft³ Recommended Port Area: 14.45 in² Recommended Tuning Frequency: 36 Hz Enclosure recommendations above do not include subwoofer, bracing, and port displacement SUBWOOFER MEASUREMENTS Cut-out Diameter 7.50" Mounting Depth 6.50" Total Height 7.63" Outside Diameter 8.65" Magnet Diameter 6.50" Current build: (I know, its a mess) Factory HU - MiniDSP6x8 - AD Designs 6.5" components - DB Drive WDX 400.4 - DB Drive WDX 2k - 12" Rockford T0 - Pre-fab 12" ported box Https://caraudiotx.com/ Link to comment Share on other sites More sharing options...
deafboncemarquis Posted January 16, 2021 Report Share Posted January 16, 2021 i can help you out bud here's some of my work Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.