SesameCreeps Posted March 6, 2021 Report Share Posted March 6, 2021 There is a black tar glue like substance that holds the tweeters in place in the sail panels. What is the best way to remove this tar so the tweeter can replaced? Thanx for any advice. Link to comment Share on other sites More sharing options...
SesameCreeps Posted March 6, 2021 Author Report Share Posted March 6, 2021 Link to comment Share on other sites More sharing options...
ehall8702 Posted March 7, 2021 Report Share Posted March 7, 2021 Little bit of heat from blow dryer or heat gun should soften that stuff up and let tweeter loose. It's a mess tho wear rubber gloves maybe. 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.