Masterbasser Posted March 8, 2021 Report Share Posted March 8, 2021 I cant seem to set the high pass filter on my apocalypse 500.4 with the cc-1, i set 2 other class a/b amps with it then spent 2 hours trying to do and redo it on the full bridge amp, is this something to do with amp design? basically i was setting the HPF at 4k and it kept telling me to keep turning up the hpf even tho it was already maxed out. I noticed when flipping the switch from full to hpf the calibration light would blink, spent 2 hours tryna do this shit at 3 am last night, any help or ideas? Kenwood excelon ddx795 3 370 amp CES alternators (audio side only) McLaren dome tweeters Crescendo 6.5 ultra neos NVX JAD800.4 4 PA x4 SPL 18's 4 Digital Designs m5's at .7 ohms each 2 K2 80 ah lithiums 3 group 31 agms Ledglow million color (12 piece) 2007 Yukon xl Link to comment Share on other sites More sharing options...
Masterbasser Posted March 9, 2021 Author Report Share Posted March 9, 2021 anyone? Kenwood excelon ddx795 3 370 amp CES alternators (audio side only) McLaren dome tweeters Crescendo 6.5 ultra neos NVX JAD800.4 4 PA x4 SPL 18's 4 Digital Designs m5's at .7 ohms each 2 K2 80 ah lithiums 3 group 31 agms Ledglow million color (12 piece) 2007 Yukon xl Link to comment Share on other sites More sharing options...
Masterbasser Posted July 31, 2021 Author Report Share Posted July 31, 2021 bump anyone? Kenwood excelon ddx795 3 370 amp CES alternators (audio side only) McLaren dome tweeters Crescendo 6.5 ultra neos NVX JAD800.4 4 PA x4 SPL 18's 4 Digital Designs m5's at .7 ohms each 2 K2 80 ah lithiums 3 group 31 agms Ledglow million color (12 piece) 2007 Yukon xl Link to comment Share on other sites More sharing options...
Dafaseles Posted July 31, 2021 Report Share Posted July 31, 2021 There's no reason it shouldn't work. All i can think of is try changing the battery. When the battery gets low, the machine does weird stuff. I'm sure you already tried that though... other than that, it should work on any amplifier 2011 Chevy Silverado under construction My build log here. Check it out! Link to comment Share on other sites More sharing options...
Arthur79 Posted July 31, 2021 Report Share Posted July 31, 2021 4 hours ago, Dafaseles said: There's no reason it shouldn't work. All i can think of is try changing the battery. When the battery gets low, the machine does weird stuff. I'm sure you already tried that though... other than that, it should work on any amplifier +1 on make sure you have a fresh battery (and preferably a Duracell or Energizer) Double check the track(s) you are playing and make sure your signal is clean. Outside of that if it keeps wigging out, try reaching out to support from D'Amore Engineering - you can shoot them an email here: [email protected] Hop that helps. Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 3, 2021 Report Share Posted August 3, 2021 Are you playing the 4k track and get a "signal" light? I wouldn't touch any nobs, until you see a signal. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.