Jump to content

using smd cc-1 on deaf bonce 500.4 apocalypse (same as sundown 500.4)


Masterbasser

Recommended Posts

I cant seem to set the high pass filter on my apocalypse 500.4 with the cc-1, i set 2 other class a/b amps with it then spent 2 hours trying to do and redo it on the full bridge amp, is this something to do with amp design? basically i was setting the HPF at 4k and it kept telling me to keep turning up the hpf even tho it was already maxed out. I noticed when flipping the switch from full to hpf the calibration light would blink, spent 2 hours tryna do this shit at 3 am last night, any help or ideas?

Kenwood excelon ddx795

 3 370 amp CES alternators (audio side only)           
       McLaren dome tweeters                                   Crescendo 6.5 ultra neos 
                                                 NVX JAD800.4
                                            4 PA x4 SPL 18's
                     4 Digital Designs m5's at .7 ohms each
        2 K2 80 ah lithiums

                              3 group 31 agms                                       Ledglow million color (12 piece)

2007 Yukon xl

 

Link to comment
Share on other sites

anyone?  

Kenwood excelon ddx795

 3 370 amp CES alternators (audio side only)           
       McLaren dome tweeters                                   Crescendo 6.5 ultra neos 
                                                 NVX JAD800.4
                                            4 PA x4 SPL 18's
                     4 Digital Designs m5's at .7 ohms each
        2 K2 80 ah lithiums

                              3 group 31 agms                                       Ledglow million color (12 piece)

2007 Yukon xl

 

Link to comment
Share on other sites

  • 4 months later...

bump anyone?

Kenwood excelon ddx795

 3 370 amp CES alternators (audio side only)           
       McLaren dome tweeters                                   Crescendo 6.5 ultra neos 
                                                 NVX JAD800.4
                                            4 PA x4 SPL 18's
                     4 Digital Designs m5's at .7 ohms each
        2 K2 80 ah lithiums

                              3 group 31 agms                                       Ledglow million color (12 piece)

2007 Yukon xl

 

Link to comment
Share on other sites

There's no reason it shouldn't work. All i can think of is try changing the battery. When the battery gets low, the machine does weird stuff. I'm sure you already tried that though... other than that, it should work on any amplifier

2011 Chevy Silverado under construction

My build log here. Check it out! 

 

Link to comment
Share on other sites

4 hours ago, Dafaseles said:

There's no reason it shouldn't work. All i can think of is try changing the battery. When the battery gets low, the machine does weird stuff. I'm sure you already tried that though... other than that, it should work on any amplifier

 

+1 on make sure you have a fresh battery (and preferably a Duracell or Energizer)  Double check the track(s) you are playing and make sure your signal is clean.  Outside of that if it keeps wigging out, try reaching out to support from D'Amore Engineering - you can shoot them an email here: [email protected]

 

Hop that helps.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 376 Guests (See full list)

×
×
  • Create New...