Jln213 Posted March 29, 2021 Report Share Posted March 29, 2021 I have a pair of sundown sa 10 classics that I am giving my cousin. I am looking for a box design. I have never built a vented box but I have the tools and skills to build one. I just don't know what dimensions to use for a vented enclosure. I am giving him 5 old kicker zr amps, the subs will be powered by a zr 240 each. I know they will be under powered but they should get about 500 watts a piece. I am looking for either a zr 600 or 1000. But until then we will be using the 240s. The box will be going in the back of a 4 runner so it's nothing crazy design wise. I just need a basic design. I have searched but I have not been able to find any standard box designs. I know there must be some somewhere. Any help will be appreciated. Thanks Link to comment Share on other sites More sharing options...
Shush Deeni Posted March 30, 2021 Report Share Posted March 30, 2021 The SA classic is the same as the SA rev. 3. Hopefully this link helps you. Link to comment Share on other sites More sharing options...
Jln213 Posted March 30, 2021 Author Report Share Posted March 30, 2021 I saw that one. Do you think it's gtg? The last post says the port area is too big. Thanks! Link to comment Share on other sites More sharing options...
Shush Deeni Posted March 30, 2021 Report Share Posted March 30, 2021 I think it should be good. Just set the subsonic filter and your highpass. I would've liked to see the port a little larger to try to keep the vent velocity below 20 m/s. The last post on that topic didn't know what he was talking about. Link to comment Share on other sites More sharing options...
Jln213 Posted March 31, 2021 Author Report Share Posted March 31, 2021 Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.