Jump to content
Second Skin Audio

97 k1500 build ideas


ehall8702

Recommended Posts

So, my cab rusted thru on my 97 chevy extended cab, I knew it was coming, I have already replaced bed and fenders and about EVERYTHING else. I got ahold of a VERY nice 3 door cab with power rear window and super clean interior. Right now I have 3 15s jammed into where rear seat was. I think I want to keep some back seats in new cab. I have really nice buckets out of an audi a6 I think I'm going to build a frame for and use as rear seats. My half ass plan is a long custom center console loaded with as much bass as I can. I really can't go any wider than 13" between seats so I think I'm going to be using 12s. Just rough measurements, I have 6.5 cubes ,may be able to stretch to just over 7 if I use a roller coaster track kinda design and go as high as bottom of rear window in the rear.  I got my 3 15s and the box sold for $800 and a new driver door lol. I think I'll be about $800-$900 budget for subs. I have everything else, 8 agm cells under hood, dual 300a alts dual runs of 3/0 temco cable, nvx jad800.4 for front stage and my taramps md8k 2 ohm to power whatever subs I decide on. I'm sure I'm gonna have to turn the md8k down since it's a bit much for my 3 15s , I'm thinking I'll end up with 3 12s but I'm looking for ideas plz! Good thing is I get to strip can, undercoat and sound deaden inside while cab is off which is gonna be nice. Whole truck going to end up a military sand tinted raptor coated so I'll get to do every little part before I even put it on my frame! I've never been so excited to do soon much work! Bad part is I get to have something on my lift for a week or so which slows down the money making but when done right I'll have this truck for a LONG time and it'll stay looking nice.

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 209 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...