Jump to content

ZVX-8 Qts published not matching calculated


Recommended Posts

Hi, I just picked up a ZVX8-D4, it will be here Monday. I'm working on modelling a box. I've tried 2 versions of WinISD and Speakerboxlite, both give me a different calculated Qts than the published. Is this normal? Am I doing something wrong?

2Ohm
Published: FS 41.8Hz, Qms 3.6, Qes 1.25, Qts 0.76
Qts calculated: 0.928


4Ohm
Published: FS 40.0Hz, Qms 7.60, Qes 1.15, Qts 0.72
Qts calculated: 0.999

 

Edited by elhabito
Link to comment
Share on other sites

Qts is a derived value. 1/Qts = 1/Qms + 1/Qes
 


With that said..... You're correct on there being a discrepancy. Wonder if they pulled values at different times during lab testing or under different conditions (breather hole covered vs. open).

If you need accurate values, might be worth your time to free air the things for 2-3 days to get the suspension in steady state, then pull parameters yourself.

Link to comment
Share on other sites

I know it is derived. You can use the published Qts and let the software define Qms or Qes, or use published Qms and Qes to define Qts. All get vastly different responses.

Am I the first person to put this information into a calculator? How did they come up with the recommended box sizes?

Guess I have to clean up my work station until I find my little DSO.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...