Jump to content

Recommended Posts

7 hours ago, Never Enough Bass said:

So my sfb 1500 works but my 3500 is still doing the same thing

I would reach out to Sundown and tell them that very thing. Seems to me if one amp works, if there's nothing wrong with the other, it should work as well. 

2011 Chevy Silverado under construction

My build log here. Check it out! 

 

Link to comment
Share on other sites

  • Replies 133
  • Created
  • Last Reply
36 minutes ago, Dafaseles said:

I would reach out to Sundown and tell them that very thing. Seems to me if one amp works, if there's nothing wrong with the other, it should work as well. 

That's what I'm thinking maybe gonna have to send it in I'm waiting for @sundownzto answer me back to see if there's anything else I could check or just send it in

06 Charger

Pioneer double din

Pioneer 6.5 and 6×9's

Knukoncept Krystal kable rca's

0 ga knukoncept kolossus wire 

Big 3 same wire ^ 1 run 

8g karma ss speaker wire

Sundown sia 3500d at 1ohm

2 Sundown U series 12's

Duralast platinum agm H7 (Main)

Xs power d3400

Trying to find a ho alt

 

 

Link to comment
Share on other sites

20211109_214504.jpg

06 Charger

Pioneer double din

Pioneer 6.5 and 6×9's

Knukoncept Krystal kable rca's

0 ga knukoncept kolossus wire 

Big 3 same wire ^ 1 run 

8g karma ss speaker wire

Sundown sia 3500d at 1ohm

2 Sundown U series 12's

Duralast platinum agm H7 (Main)

Xs power d3400

Trying to find a ho alt

 

 

Link to comment
Share on other sites

1 hour ago, Dafaseles said:

That's a cool picture! 

Thanks it sucks tho the subs are 1500 a piece and all I have running them are 1500

06 Charger

Pioneer double din

Pioneer 6.5 and 6×9's

Knukoncept Krystal kable rca's

0 ga knukoncept kolossus wire 

Big 3 same wire ^ 1 run 

8g karma ss speaker wire

Sundown sia 3500d at 1ohm

2 Sundown U series 12's

Duralast platinum agm H7 (Main)

Xs power d3400

Trying to find a ho alt

 

 

Link to comment
Share on other sites

15 hours ago, Never Enough Bass said:

My volt meter is hooked up straight to the amp I'm seeing 14.4v and .y ground is hooked straight to the battery

How is your battery grounded? You did the big 3 right? With 1/0 OFC? I'm sure you mentioned it, I can't remember though

2011 Chevy Silverado under construction

My build log here. Check it out! 

 

Link to comment
Share on other sites

12 minutes ago, Dafaseles said:

How is your battery grounded? You did the big 3 right? With 1/0 OFC? I'm sure you mentioned it, I can't remember though

Yea big 3 is done with 1/0 ofc and 1/0 to the second battery it's grounded to 2 different factory locations I tested both of them I get a steady 14.4v even with the 1500 full tilt but it just doesn't push these subs like I want so idk what's wrong with the 3500

06 Charger

Pioneer double din

Pioneer 6.5 and 6×9's

Knukoncept Krystal kable rca's

0 ga knukoncept kolossus wire 

Big 3 same wire ^ 1 run 

8g karma ss speaker wire

Sundown sia 3500d at 1ohm

2 Sundown U series 12's

Duralast platinum agm H7 (Main)

Xs power d3400

Trying to find a ho alt

 

 

Link to comment
Share on other sites

6 minutes ago, Never Enough Bass said:

Yea big 3 is done with 1/0 ofc and 1/0 to the second battery it's grounded to 2 different factory locations I tested both of them I get a steady 14.4v even with the 1500 full tilt but it just doesn't push these subs like I want so idk what's wrong with the 3500

I was just thinking maybe the battery wasn't grounded well enough for the 3500 or something, but that doesn't seem to be the case. 

Hopefully Sundown gets back to you soon

2011 Chevy Silverado under construction

My build log here. Check it out! 

 

Link to comment
Share on other sites

4 minutes ago, Dafaseles said:

I was just thinking maybe the battery wasn't grounded well enough for the 3500 or something, but that doesn't seem to be the case. 

Hopefully Sundown gets back to you soon

Yea I double checked everything I'm probably just gonna have to request a rma and have them fix it cause I've tried everything my grounds are like .2 .3 not even close to being a bad ground and the light sequence is weird it doesn't just stay in protect it goes power, clip, then protect 3 times the repeat and that's all it does the internal fan turns on but no sound or anything 

06 Charger

Pioneer double din

Pioneer 6.5 and 6×9's

Knukoncept Krystal kable rca's

0 ga knukoncept kolossus wire 

Big 3 same wire ^ 1 run 

8g karma ss speaker wire

Sundown sia 3500d at 1ohm

2 Sundown U series 12's

Duralast platinum agm H7 (Main)

Xs power d3400

Trying to find a ho alt

 

 

Link to comment
Share on other sites

Got the Ole smd terminal to

20211108_152343.jpg

06 Charger

Pioneer double din

Pioneer 6.5 and 6×9's

Knukoncept Krystal kable rca's

0 ga knukoncept kolossus wire 

Big 3 same wire ^ 1 run 

8g karma ss speaker wire

Sundown sia 3500d at 1ohm

2 Sundown U series 12's

Duralast platinum agm H7 (Main)

Xs power d3400

Trying to find a ho alt

 

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 309 Guests (See full list)

    • There are no registered users currently online



×
×
  • Create New...