P3GL3G Posted October 1, 2021 Report Share Posted October 1, 2021 Not sure where else to post this issue, but I recently installed a TM-1. Prior to installing the amp rack in the car, I tested the device and all four fans turned on perfectly. A day or so after moving the amp rack to the car the temp meter scrolls left and right continously. I have the device fused as per the instructions, power and ground are tied directly to the rear battery, trigger is supplied from the remote wire, and white and black wires are connected to the correct wires on the fans. VID_52270206_192148_706.mp4 Link to comment Share on other sites More sharing options...
KevinHackworth Posted March 26, 2022 Report Share Posted March 26, 2022 So I purchased the TM-I and can’t find an installation manual? NoWhere? So can you head me to a YouTube video a diagram or anything? Link to comment Share on other sites More sharing options...
Dafaseles Posted March 26, 2022 Report Share Posted March 26, 2022 9 minutes ago, KevinHackworth said: So I purchased the TM-I and can’t find an installation manual? NoWhere? So can you head me to a YouTube video a diagram or anything? Go to this page https://damore-engineering.myshopify.com/products/tm-1 And scroll down until you see the link to download the owners manual 2011 Chevy Silverado under construction My build log here. Check it out! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.