Jessica Posted March 1, 2022 Report Share Posted March 1, 2022 i'm reconing my mayhems to 12's and i didnt order direct leads. i can be bothered to solder to the terminals and would rather just crimp lugs onto the ends of the tinsels. i was thinking i could run the tinsels through the existing push terminals to hold them in place and then crimp on lugs. anyone else done it this way? what lugs or connections did you use? TIA Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
SnowDrifter Posted March 1, 2022 Report Share Posted March 1, 2022 Get some nylon shoulder washers and run through-bolts? ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.