Bass Mec Posted April 30, 2022 Report Share Posted April 30, 2022 Enclosure for Sundown SA v.2 15” Hello, Could anyone help with confirming if the port area is ok for this 15” enclosure? Sub is a sundown sa15 v2 going to get 1500w RMS. Sundown recommend 44” port area tuned to 35hz. Music will be general hiphop/beat/rnb. Or should I be aiming for 32hz? https://subbox.pro/en/design/?bt=2&bw=820&bh=460&bv=90.6&mt=18&fp=1&sq=1&ss=15&cd=356&md=219.7&sv=4.8&so=0&sd=20&sb=81&sn=&pt=4&pq=1&rf=35&pd=190.17&pw=2&pa=283.89&pp=100 @Dafaseles are you there 😁 you helped out with my 2 x 12” enclosure which is still rockin! Thanks Link to comment Share on other sites More sharing options...
Joe X Posted April 30, 2022 Report Share Posted April 30, 2022 44 Square inches is for the sundown suggested box, if you are overpowering the sub or over sizing the box, as for tuning, that application is probably not figuring the end correction because its generally high. Link to comment Share on other sites More sharing options...
Bass Mec Posted April 30, 2022 Author Report Share Posted April 30, 2022 Thanks Joe X, what should the port area be ideally for that box? Link to comment Share on other sites More sharing options...
Joe X Posted April 30, 2022 Report Share Posted April 30, 2022 You are looking to do a 0.2 net oversize only I say you don't need a port area correction unless you wanted to run way over rated power, if you want to do something about port area anyways add some 2-3 square inches, no problem. Link to comment Share on other sites More sharing options...
Bass Mec Posted May 1, 2022 Author Report Share Posted May 1, 2022 Sounds good, I will go with the box design as it is then report back with the outcome. Thanks again 👍🏼 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.