Alex M Posted May 25, 2022 Report Share Posted May 25, 2022 So I'm planning on upgrading my door speakers and I want to add 2 of the same speakers to the system by making a center console so the front would be set up like this- ๐ช๐๐ช๐][๐๐ช๐๐ช. However I havnt found any information on how I should build the speaker section of the center console. Do I build it so that they are enclosed, opened up so they share the same air within the interior of the console? Also should I use seperat tweeters and a horn (the speakers going into the door have built in tweeters)? Here are the speakers going into the doors and center consoleย DS18 PRO-HY6.4B 6.5". Thank yall so much for the help! Link to comment Share on other sites More sharing options...
Never Enough Bass Posted May 26, 2022 Report Share Posted May 26, 2022 I would go sealed the speakers share the same air but if u have 1 on each side u would probably have to reverse the polarity on 1 of them and if your tweeters are down low I would add some higherย 06 Charger Pioneer double din Pioneer 6.5 and 6ร9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wireย Big 3 same wire ^ 1 runย 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt ย ย Link to comment Share on other sites More sharing options...
Alex M Posted May 27, 2022 Author Report Share Posted May 27, 2022 On 5/25/2022 at 11:28 PM, Never Enough Bass said: I would go sealed the speakers share the same air but if u have 1 on each side u would probably have to reverse the polarity on 1 of them and if your tweeters are down low I would add some higherย I'm not sure I understand the part about the tweeters, but if you're saying that I should get regular speakers and separate tweeters as opposed to geting the hybrid speakers with the built in tweeter/driver, then I can put the new tweeters in the sail trim where the stock ones are to have them higher than the regular speakers are. Link to comment Share on other sites More sharing options...
Never Enough Bass Posted May 27, 2022 Report Share Posted May 27, 2022 12 hours ago, Alex M said: I'm not sure I understand the part about the tweeters, but if you're saying that I should get regular speakers and separate tweeters as opposed to geting the hybrid speakers with the built in tweeter/driver, then I can put the new tweeters in the sail trim where the stock ones are to have them higher than the regular speakers are. Yes exactly components up front so a mid bass and a tweeters will sound better 06 Charger Pioneer double din Pioneer 6.5 and 6ร9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wireย Big 3 same wire ^ 1 runย 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt ย ย Link to comment Share on other sites More sharing options...
BassMunky Posted May 27, 2022 Report Share Posted May 27, 2022 Depend what you want Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported Link to comment Share on other sites More sharing options...
Alex M Posted May 28, 2022 Author Report Share Posted May 28, 2022 11 hours ago, Never Enough Bass said: Yes exactly components up front so a mid bass and a tweeters will sound better ๐ย Link to comment Share on other sites More sharing options...
Alex M Posted May 28, 2022 Author Report Share Posted May 28, 2022 5 hours ago, BassMunky said: Depend what you want How so?ย Link to comment Share on other sites More sharing options...
Alex M Posted May 29, 2022 Author Report Share Posted May 29, 2022 What are some things an amplifier needs to be good for powering tweeters? Such as full pass, low pass crossover....? Link to comment Share on other sites More sharing options...
Dafaseles Posted May 29, 2022 Report Share Posted May 29, 2022 If you are using a passive crossover, or DSP, you need at least a full range function on the amp (payable up to 20k hz) If you're using the amplifiers crossovers to protect the tweeters, you'll need a HPF (high pass filter) that can be set at least up to (and just guessing here) 4,500 hz or so. It depends on the capabilities of the tweeters you're using.ย Basically, you're just trying to keep them from playing too low of a frequency that will damage the tweeter 2011 Chevy Silverado under construction My build log here. Check it out!ย ย Link to comment Share on other sites More sharing options...
Alex M Posted May 30, 2022 Author Report Share Posted May 30, 2022 Ok thank you. Yes I'm looking into using a dsp . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.