Sid coleman Posted June 21, 2022 Report Share Posted June 21, 2022 Hello everyone I’m looking for help making a enclosure design for a single x15v1 My max dimensions are 36wide 19 tall and 17 deep with port and sub up Link to comment Share on other sites More sharing options...
Joe X Posted June 21, 2022 Report Share Posted June 21, 2022 What are the amp and the vehicle? Link to comment Share on other sites More sharing options...
Sid coleman Posted June 21, 2022 Author Report Share Posted June 21, 2022 2012 Hyundai Veloster and a cab 22 Link to comment Share on other sites More sharing options...
Sid coleman Posted June 21, 2022 Author Report Share Posted June 21, 2022 I found this one but it is to tall and I can’t shorten it without messing up the tuning and everything Link to comment Share on other sites More sharing options...
Joe X Posted June 21, 2022 Report Share Posted June 21, 2022 Ok so your dimensions are insufficient for the stock spec you show above so I took a little depth and height keeping the original spec as close as possible, let me know in case the following external dimensions will not work for you. Here is an even tighter spec but net volume takes a 0.25 net hit: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.