TurboTravis Posted July 14, 2022 Report Share Posted July 14, 2022 I would like to add a diode to my s sense wire to increase my charging voltage. Can someone please help identify the wire? I think it is the white/green wire on the page of the service manual that I attached. Thanks in advance! -Travis Link to comment Share on other sites More sharing options...
TurboTravis Posted July 14, 2022 Author Report Share Posted July 14, 2022 The vehicle is a 2000 Honda Accord EX 2.3 4 cylinder. Link to comment Share on other sites More sharing options...
SnowDrifter Posted July 15, 2022 Report Share Posted July 15, 2022 What are you looking to gain by doing this? What's your current charge voltage? ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
snafu Posted July 16, 2022 Report Share Posted July 16, 2022 This isn't so straight forward on this vehicle. Best to contact the guys at Mechman and ask their advice. In addition, as SD says, more voltage isn't always better. Car batteries like 2.4V per cell at maximum. That's 14.4V for a traditional 12V battery with 6 cells. More voltage will shorten the life of the battery - unless we're talking deep cycle marine batteries . . . Tony Candela - SMD Sales & Marketing Email me at [email protected] to learn about becoming an SMD Partner! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.