Mattc43 Posted October 2, 2022 Report Share Posted October 2, 2022 Who’s ran it and what’re your thoughts? Link to comment Share on other sites More sharing options...
02Blazer Posted October 2, 2022 Report Share Posted October 2, 2022 getting mine together , gonna go with a 64ah , going to running around 550 amps so the 64ah will handle that easily with a Mechman 240 . if i go with more power , i'll just add more cells !!! Link to comment Share on other sites More sharing options...
Mattc43 Posted October 2, 2022 Author Report Share Posted October 2, 2022 Same thing I’m doin! You recommend a 96ah headway bank for 10-12k watts to me in another post so that’s what I’ll be doin. Yinglong is $$$ and I have an internally regulated alt (Dc 270) and I’d like to keep it simple and run a stout 12v system. Down the road I’m gonna get a single 370 or something externally regulated and run ying long. I’ll be running a wolfram 9k at half and a 600.4 2 hours ago, 02Blazer said: getting mine together , gonna go with a 64ah , going to running around 550 amps so the 64ah will handle that easily with a Mechman 240 . if i go with more power , i'll just add more cells !!! Link to comment Share on other sites More sharing options...
02Blazer Posted October 2, 2022 Report Share Posted October 2, 2022 38 minutes ago, Mattc43 said: Same thing I’m doin! You recommend a 96ah headway bank for 10-12k watts to me in another post so that’s what I’ll be doin. Yinglong is $$$ and I have an internally regulated alt (Dc 270) and I’d like to keep it simple and run a stout 12v system. Down the road I’m gonna get a single 370 or something externally regulated and run ying long. I’ll be running a wolfram 9k at half and a 600.4 you'd be good with 96 ah , if i upgrade to the amp i want , a Deaf Bonce AAB7900.1D , i will go to 96 ah also . got my bus bars for the 64ah already made , if and when i do go to the 96 ah , i just have to make 2 more of the bigger plates which i already have a template and can make some more . these are 1/4'' 6061 aluminum Link to comment Share on other sites More sharing options...
02Blazer Posted October 2, 2022 Report Share Posted October 2, 2022 BTW , 96AH of headway is good for 9600-12000 watts . Link to comment Share on other sites More sharing options...
jmanjr82 Posted October 2, 2022 Report Share Posted October 2, 2022 Would you be willing to make me some I will obviously pay your price. I have seen those same style online but look thinner and cheap. Yours look great. I have been up in the air on mine I have 96 cells so 192a will be running a taramps 15k and skar 150.4. Link to comment Share on other sites More sharing options...
02Blazer Posted October 2, 2022 Report Share Posted October 2, 2022 4 minutes ago, jmanjr82 said: Would you be willing to make me some I will obviously pay your price. I have seen those same style online but look thinner and cheap. Yours look great. I have been up in the air on mine I have 96 cells so 192a will be running a taramps 15k and skar 150.4. sorry , just make them for myself , i do them by hand so it's not worth it to me Link to comment Share on other sites More sharing options...
jmanjr82 Posted October 3, 2022 Report Share Posted October 3, 2022 Totally understand! Where did you get the aluminum? Link to comment Share on other sites More sharing options...
02Blazer Posted October 3, 2022 Report Share Posted October 3, 2022 15 hours ago, jmanjr82 said: Totally understand! Where did you get the aluminum? bought off Ebay ! it was 4 pcs of 6 x 6 x 1/4 6061 aluminum plate , that's enough for a 64ah bank , for a 96 ah , you would need 6 pcs , but if i go with a 96 ah bank , i will make the plates out of 3/8''plate . the bars i made our of 1/4'' is good for around 774 amps . 3/8 will be good for 1161 amps . the 4mm plates i had gotten (below post ) are good for 487 amps . i wanted more headroom in amperage to be be able to wire below 1 ohm since the amp will pull more current Link to comment Share on other sites More sharing options...
02Blazer Posted October 3, 2022 Report Share Posted October 3, 2022 15 hours ago, jmanjr82 said: Totally understand! Where did you get the aluminum? here's a place i got the 4mm bars/plates from , they now sell 1/4'' plates like the one i made . i used the 4mm plates as templates to make my 1/4'' bars and will use them to make 3/8'' ones https://www.ebay.com/itm/275316113431 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.