ddymond Posted October 6, 2022 Report Share Posted October 6, 2022 (edited) I'm currently planning on installing a dm-608 and dm-810, I am also moving up from a t400x4ad to two 400x4ad's and a t1000x5ad so i will have 12 channels surround to power the two sets of Focal flax evo 3 ways and also the 600w sub channel that will run a p3sd4-8 (at 8 ohm) I am running the t750x1bd to a t1s1-12 and a t2500x1bdCP to a T2s1-16. I have decided to run front and sub line level from the deck to the dm-810 then, using the first 400x4 and 2 surround channels and the sub channel of the 1000x5. The 2 remaining outputs from the 810 will pass sub channel on to the 608 and then the rear line level goes directly from the deck to the 608 which will feed the the remaining 2 surround channels from the 1000x5 and the other 400x4 to the rear with the last 2 810 outputs going to the t2500x1 and t750x1. This will hopefully give me time alignment on all 15 channels, and eq to all channels, and a separate bass knob for the 8 and 12/16 My first question, Is this the right way to run the 2 dsp's to 5 amps/15 speakers? Second question, Can anyone help me to find a good process to make sure the components are all getting the correct power so I'm not blowing anything? Is it just math on the voltage vs ohms? Or do I need to dyno each channel? I'm unsure of the best method. I assume everything but the 16 and the 6.5s are at risk. Thanks in advance, Dom 20220911_171152_001.mp4 Edited October 6, 2022 by ddymond Quote Link to comment Share on other sites More sharing options...
jmanjr82 Posted October 6, 2022 Report Share Posted October 6, 2022 Good start would be to invest in the smd tools dd1 and cc1 to set your amps Quote Link to comment Share on other sites More sharing options...
Uncle G Posted February 13, 2023 Report Share Posted February 13, 2023 Makes no sense to use 2 separate DSP's. Aren't there DSP's with 12 channels output ? Also, not sure why you need 12 channels LOL ... What are these "surround" channels ? Seems like it will be hard to properly TA and EQ the soundstage. Quote Uncle G Link to comment Share on other sites More sharing options...
Uncle G Posted February 13, 2023 Report Share Posted February 13, 2023 Why more than 1 size subwoofer ? In the video above they are clearly playing against each other. Phasing and cancellation issues are sure to be had. Quote Uncle G Link to comment Share on other sites More sharing options...
Joe X Posted February 13, 2023 Report Share Posted February 13, 2023 Two subs of different sizes in the same box, that's a no go, just saying. Quote Link to comment Share on other sites More sharing options...
audiofanaticz Posted February 14, 2023 Report Share Posted February 14, 2023 well this is a fairly old topic that got bumped. Wonder how these build is going..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.