pnutz37 Posted January 12, 2023 Report Share Posted January 12, 2023 I'm looking to run one of these as an alternate set up to what I have for my daily driver. I plan on using my 18" Fi Neo 4.11 (Dual 0.7). Has anyone run this amp consistently at 0.35? I'd like to utilize this amp as much as I can. Link to comment Share on other sites More sharing options...
02Blazer Posted January 13, 2023 Report Share Posted January 13, 2023 running it at .35 ohms ! good luck with that if i were you i'd put the build on hold , save up to get a Korean board Link to comment Share on other sites More sharing options...
stingray72 Posted January 16, 2023 Report Share Posted January 16, 2023 i have a soundstream dtr1 3400d that will do .35 with good electrical on ebay. Link to comment Share on other sites More sharing options...
Nofx230 Posted January 17, 2023 Report Share Posted January 17, 2023 Which Smart Bass 5k you trying to run? The .5-2ohm model or the 1-2ohm model? I'm currently looking at this amp to power my ZV4-15 as I'm only clamping 1850watts with my Orion hcca 3000.1 at 1ohm nominal Link to comment Share on other sites More sharing options...
pnutz37 Posted January 17, 2023 Author Report Share Posted January 17, 2023 39 minutes ago, Nofx230 said: Which Smart Bass 5k you trying to run? The .5-2ohm model or the 1-2ohm model? I'm currently looking at this amp to power my ZV4-15 as I'm only clamping 1850watts with my Orion hcca 3000.1 at 1ohm nominal The Smart 5 is 1-2 ohm. The Smart 5 Bass is 0.5-2ohm. The bass in the smart series is stable to 0.5 ohm. Link to comment Share on other sites More sharing options...
Nofx230 Posted January 17, 2023 Report Share Posted January 17, 2023 awe yes minor overlook on my part. so both these amps can take up to 4v rca inputs? because iv heard some of the other series don't like much more than 2v or 2.5v Link to comment Share on other sites More sharing options...
pnutz37 Posted January 18, 2023 Author Report Share Posted January 18, 2023 19 hours ago, Nofx230 said: awe yes minor overlook on my part. so both these amps can take up to 4v rca inputs? because iv heard some of the other series don't like much more than 2v or 2.5v That's the word on the street. I've had a smart 3 running off a Kenwood headunit that's 5V pre-out and it didn't have any issues. I'm currently running a Smart 3 bass on similar pre-out voltage with no issues. Link to comment Share on other sites More sharing options...
Nofx230 Posted January 19, 2023 Report Share Posted January 19, 2023 7 hours ago, pnutz37 said: That's the word on the street. I've had a smart 3 running off a Kenwood headunit that's 5V pre-out and it didn't have any issues. I'm currently running a Smart 3 bass on similar pre-out voltage with no issues. Well that’s more reassuring to hear. I ain’t got the coin right now for a big half bridge, maybe I’ll wait and do more research on the matter. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.