Jump to content
Sundown Audio

400rms sub 2x4ohm what amp?


Lukis

Recommended Posts

Example: the inexpensive Skar RP-800.1D will deliver 600W into 2 ohm ( coils wired in parallel ) which will be fine as long as you don't play a near clipping sinewave.

 

But you could use any amp that will deliver at least 400W rms @2 ohm as long as you set your gains right.

 

 

 

Link to comment
Share on other sites

This is how you do it:

 

SWDVCpar.png

 

Save as above just presented differently:

 

SWDVCpar-B.png

 

 

Don't forget the signs, positive of coil1 to positive of coil2 to positive on the amp, same with negative as you can see in the figures.

 

 

 

 

Link to comment
Share on other sites

Okay found the amp in your range that You talked about its a alpine mrv-500 its 500rms at 2ohms so I'm gonna wire it in parallel it should be good and I'm going to use 4wg wire with 80 amp fuse. Maybe you have some suggestions maybe its wrong or something. Thanks in advance.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 293 Guests (See full list)

×
×
  • Create New...