SPLGEO Posted December 8, 2006 Report Share Posted December 8, 2006 Thats cuz sonic electronic is using the ol t3k fuse rating. The T4k has a 500amp fuse....there is no way ur gonna get 4k + rms outta a 300amp fuse.....u might get up to about 3400 but not 4k. Iv seen meades and his came with 500amp fuses.....http://www.stevemeadedesigns.com/forums/index.php?topic=297.0 then explain how the t15k one pulls around 375 amps Quote 1995 Geo Prism . FI BTL 12 P chamfer, 3rdmagnet HIXMAX COIL 1/0 big 3 HIFONICS COLOSSUS 1.7 cubs tuned to 60hz in the works 2xTruck battery 1125 cca. Link to comment Share on other sites More sharing options...
ChevyBoy Posted December 8, 2006 Report Share Posted December 8, 2006 built in charging system. charges itself. Quote Link to comment Share on other sites More sharing options...
meade916 Posted December 8, 2006 Report Share Posted December 8, 2006 on the t15k go read up on the technology....also as the install progresses ill be a REAL judge on if this amp does what it says it will do. I scaled back the caddy plans, i was going to do 10 batterys just for the hell of it and because it cant hurt right? Nahh my RF "contact" says 2 batterys at the most....so when this is in full wang-age ill let you guys know if its doin what its supposed to On my amps i have 1/0 going to each T4000.1bd. The runs are about 6 feet long each from the batts to the amps and are doing JUST fine. Yes the T4k has a 500amp fuse. Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
CUT BUDDY Posted December 8, 2006 Author Report Share Posted December 8, 2006 on the t15k go read up on the technology....also as the install progresses ill be a REAL judge on if this amp does what it says it will do. I scaled back the caddy plans, i was going to do 10 batterys just for the hell of it and because it cant hurt right? Nahh my RF "contact" says 2 batterys at the most....so when this is in full wang-age ill let you guys know if its doin what its supposed to On my amps i have 1/0 going to each T4000.1bd. The runs are about 6 feet long each from the batts to the amps and are doing JUST fine. Yes the T4k has a 500amp fuse. So I take it that they'll still get 4k even off 1/0 cuz of the efficiency and extra power from the batts? Quote TEAM MechMan Alternators Link to comment Share on other sites More sharing options...
CUT BUDDY Posted December 8, 2006 Author Report Share Posted December 8, 2006 meade, did u ever get that outkast song I sent u? Quote TEAM MechMan Alternators Link to comment Share on other sites More sharing options...
meade916 Posted December 8, 2006 Report Share Posted December 8, 2006 on the t15k go read up on the technology....also as the install progresses ill be a REAL judge on if this amp does what it says it will do. I scaled back the caddy plans, i was going to do 10 batterys just for the hell of it and because it cant hurt right? Nahh my RF "contact" says 2 batterys at the most....so when this is in full wang-age ill let you guys know if its doin what its supposed to On my amps i have 1/0 going to each T4000.1bd. The runs are about 6 feet long each from the batts to the amps and are doing JUST fine. Yes the T4k has a 500amp fuse. So I take it that they'll still get 4k even off 1/0 cuz of the efficiency and extra power from the batts? i think the length of the wire has as much to do with it carrying the load of a 4,000 watt amp as anything. My runs are fairly short and all thats required is a 1/0 wire. Of course if there is a 30 foot run it may start causing problems.... Put it this way, do i not look like i got it handled Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
meade916 Posted December 8, 2006 Report Share Posted December 8, 2006 meade, did u ever get that outkast song I sent u? ummm im not sure.... Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
SPLGEO Posted December 8, 2006 Report Share Posted December 8, 2006 ok thanks for clearing that up on my part. guess someone needs to write sonic e Quote 1995 Geo Prism . FI BTL 12 P chamfer, 3rdmagnet HIXMAX COIL 1/0 big 3 HIFONICS COLOSSUS 1.7 cubs tuned to 60hz in the works 2xTruck battery 1125 cca. Link to comment Share on other sites More sharing options...
CUT BUDDY Posted December 8, 2006 Author Report Share Posted December 8, 2006 meade, did u ever get that outkast song I sent u? ummm im not sure.... Yea check ur mail....I sent it on the 30th of Nov. Email titled : "Here it is" Quote TEAM MechMan Alternators Link to comment Share on other sites More sharing options...
mrrairai Posted December 9, 2006 Report Share Posted December 9, 2006 ok thanks for clearing that up on my part. guess someone needs to write sonic e Also sonic e might be going off of the manual. The manual says its (2) 300 A fuses stacked when its actually that (1) 500 A fuse. Quote Member since 25 Jun 2006 2011 Yukon DenaliCustomLightz 4300K HID RetrofitEsky TailsEsky Third BrakeEsky 22sEsky Appliques Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.