meade916 Posted January 3, 2007 Report Share Posted January 3, 2007 well you guys know some of the hold up on the "hooptie" (chickens OTHER caddy) was that he was gettin his new house built and its no real priority.....but i get a desperate call after he moved in last week. Somethin like "my new surround sound sounds good and all but i tried to play some 3-6 Mafia and it aint loud enough"...in other words the red flare was shot up in the air and i seen it. So i head up to take some measurements and he decides he wants it to be BADD, like everything we do so thats whats about to happen. Keep in mind he has DOPE surround sound sunk into the cielings and a 63" plasma on the wall so this is NOT for home theater this is for MUSIC, ie 2 way loudspeakers for when its time to shake the house. I decided if he wants "badd" then he'll get "badd".....heres the stats. Two, 7 foot towers......one on each side of course. EACH TOWER will hold (2) 15" Fi BTL single vc subs (dual VC but prewired under the dust cap at 2ohms for me so its less hassle) (4) 6.5" mids (i forget the name but Scott designed them so they gotta be good) (2) Vifa tweets Towers are ported with 130" of area and 30" deep.....tuned to 27hz with a seperate 1ft3 box inside tower to isolate the mids/highs from the subs. Of course he will need power so today i bought him (2) Crown XTI 4000 (3200 w) for bass (1) Crown XTI 1000 (1400 w) for mids/highs (1) Behringer Ultra -DI Pro D1800 (for converting unbalanced inputs into balanced so we can use his reciever with these amps) Custom Crossovers designed and built by Scott Behringer Crossover boxes are under construction right now i only have about a day into them but 5 sheets of MDF later and i still need another one. At 7ft tall, Its the length thats killin me... so dont laugh to hard because home stereo isnt my expertise but not a bad start, eh? Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
meade916 Posted January 3, 2007 Author Report Share Posted January 3, 2007 oh ya, i know they are still rough, gimme time they should be cool when done and LOUD AS FUCK TOO........i would hope at 4600 watts. EDIT: MORE PICS might not seem like a lot of progress but when you do towers, everything you do needs to be done twice. Heres todays work. Now its time to build the boxes inside the boxes. This is a 1 ft3 box that will house the 4 6 1/2's so they dont get obliterated by the 15's. http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07938.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07940.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07943.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07944.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07946.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07948.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07952.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07953.jpg this is where it will go. The last pic i post will explain it better. I need a cut-out number for the 6.5's that are going in that spot before i can cut them. I should have that tomorrow. http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07956.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07957.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07960.jpg i photoshopped in some circles to show where the mids and tweets are going to be. It will all be countersunk as well after i add another layer to the faceplate. http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07962.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07963.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07964.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07965.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07967.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07968.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07969.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07970.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07971.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07973.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07974.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07977.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07978.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07979.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07980.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07981.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07982.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07984.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07985.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07986.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC07987.jpg Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
CompressionFed Posted January 3, 2007 Report Share Posted January 3, 2007 This will be an interesting project to watch. Do you follow any different rules, or any special considerations when doing home audio? Quote Link to comment Share on other sites More sharing options...
meade916 Posted January 3, 2007 Author Report Share Posted January 3, 2007 im not that deep into home setups, mainly the 12v world......but ill soon find out oh ya when this is done its back to the other caddy and T15K.......as you can imagine, his new house comes first and now that its done (mostly) we can start focusing on that project again (when these are done anyway). update 1-10-07 made some screens tonite....actually just the frames so far, ill get the rest of it done tomorrow. I didnt use grille snaps im using Neo- magnets. They work so good all you need to do is get the grill close to the right spot and it pulls itself to the place its supposed to be. these were embedded in superglue gel and pounded in flush on both the screen and the front of the tower. . . . . . . heres tonites work....the new up-cut spiral bit RULES. http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08017.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08018.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08019.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08020.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08021.jpg added a few more magnets to make it even stronger. These things are GREAT. http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08022.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08025.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08026.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08027.jpg Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
Coolwazabi Posted January 4, 2007 Report Share Posted January 4, 2007 lol... damn steve... you look like ur 5ft tall... and when are we gonna finish the NBA 07 Finals ?? and why FI Q ? Quote Link to comment Share on other sites More sharing options...
meade916 Posted January 4, 2007 Author Report Share Posted January 4, 2007 im 5' 8......the boxes are 7' tall. ive been too busy for xbox lately FI Q because FI Q is a good choice for what im doing.... update;1-13-07 http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08056.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08058.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08059.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08060.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08061.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08062.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08064.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08065.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08067.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08070.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08077.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08078.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08080.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08082.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08084.jpg screens done tonite as well..... http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08086.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08087.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08088.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08089.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08090.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08091.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08092.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08093.jpg http://img.photobucket.com/albums/v518/meade916/chickens%20towers/DSC08095.jpg Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
Dale Posted January 4, 2007 Report Share Posted January 4, 2007 Steve, I don't think it looks bad at all. As usual, your enclosure build is solid, clean and professional. I would say post flex vidz when you're done but I don't think chicken (or anyone) wants a house that flexes. LOL Good work man. Keep the pics coming. Quote Link to comment Share on other sites More sharing options...
Andrew Posted January 4, 2007 Report Share Posted January 4, 2007 Steve, that looks like it's definatly going to be veeeery Hi-def home theater. If it turns out anything like your car audio/video installs it's going to be rather impressive. Keep up the good work man, youngens like myself are intrigued. Quote New project in the works Link to comment Share on other sites More sharing options...
AI James Posted January 4, 2007 Report Share Posted January 4, 2007 Steve, I don't think it looks bad at all. As usual, your enclosure build is solid, clean and professional. I would say post flex vidz when you're done but I don't think chicken (or anyone) wants a house that flexes. LOL Good work man. Keep the pics coming. get some all thread ROFL j/k Quote Link to comment Share on other sites More sharing options...
Dale Posted January 4, 2007 Report Share Posted January 4, 2007 Steve, I don't think it looks bad at all. As usual, your enclosure build is solid, clean and professional. I would say post flex vidz when you're done but I don't think chicken (or anyone) wants a house that flexes. LOL Good work man. Keep the pics coming. get some all thread ROFL j/k LOL...now that's just wrong. Picture waking up at 3 in the morning with all the lights off. You walk to the kitchen for a snack, and just before you get there you are CLOSE-LINED by an all-thread rod. I bet chicken would like that...LOL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.