blbl84 Posted May 27, 2014 Report Share Posted May 27, 2014 actually ı see port displacement and gross volume but torres shows like 4 ft3 , 2 ft3 , 1 ft3 etc , torres dosent show ıf box or displacement like 1.25 ft3 , 3.3 ft3 etc,,ı cant see remainder , what is the problem ? Link to comment Share on other sites More sharing options...
Torres Posted May 27, 2014 Author Report Share Posted May 27, 2014 Post a screen shot please do I can see everything Link to comment Share on other sites More sharing options...
blbl84 Posted May 28, 2014 Report Share Posted May 28, 2014 ı couldnt get upper part but here is the dimensions height :15 width : 35 depth : 28 according to the my calculations gross vol should be 6.94 and por disp is about 2.3 ft3 Link to comment Share on other sites More sharing options...
Jessica Posted May 28, 2014 Report Share Posted May 28, 2014 are you in a country that uses metric by default? I remember some weird bug with non-imperial systems causing issues when using torres and using imperial. i ask because you have commas in your numbers which is an indicator of non imperial, here in the states we uses periods for decimal points. Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
blbl84 Posted May 28, 2014 Report Share Posted May 28, 2014 yes sir ı'm from Turkey , we use metric system Link to comment Share on other sites More sharing options...
Jessica Posted May 28, 2014 Report Share Posted May 28, 2014 yes sir ı'm from Turkey go back to here http://www.stevemeadedesigns.com/board/topic/38791-torres-box-tuning-calculator-updated-818/page-31#entry2704679 similar issue, i think it might be some issue with .net framework, but i dont know for sure. Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
blbl84 Posted May 28, 2014 Report Share Posted May 28, 2014 ı update net framework but problem stil continue Link to comment Share on other sites More sharing options...
Jessica Posted May 28, 2014 Report Share Posted May 28, 2014 i dont think it will matter, have you tried to just switch to metric and see if you get more accurate results? Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
blbl84 Posted May 28, 2014 Report Share Posted May 28, 2014 yes ı tried , this time it shows gross volume accurate but port disp is about same , ıt shows port disp like 28 litres: 1 ft3 , 56 litres : 2 ft3 but still ı cant see remainder part...ı designed a box that port disp is about 42.5 litres (1.5 ft3 ) but it shows as 28 litres (1 ft3 ) .....strange Link to comment Share on other sites More sharing options...
hutt132 Posted June 1, 2014 Report Share Posted June 1, 2014 I'm trying to make a 2.5ft^3 box tuned at 33Hz - 34Hz. Box 1 (33Hz): Box 2 (34Hz): In box 1 I adjusted until Gross Volume was 2.5, and in box 2 I adjusted until Net Volume was 2.5. Which one is correct? Also, is the Physical Port Length the length of the port wall on the inside of the box? Does the correct version of the box look good? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.