Guest KyleCannon Posted March 20, 2009 Report Share Posted March 20, 2009 Hey guys, Looking at getting a 18" BTL in the future... what is the minimum height of an enclosure with a 18" BTL to see if it will go in my trunk easily. Thanks! Quote Link to comment Share on other sites More sharing options...
Stephen Posted March 20, 2009 Report Share Posted March 20, 2009 BTL18 DUAL 1 | DUAL 2 Fs: 31.9 Hz | 31.1 Hz Re: 0.7 Ohms/coil | 1.4 Ohms/coil Qms: 6.26 | 6.42 Qes: .26 | .24 Qts: .24 | .023 Mms: 313g | 329g Sd: 1210cm^2 | 1210cm^2 Vas: 163.1 l | 163.1 l Spl: 94.9dB 1W/1m | 94.9dB 1W/1m Bl: 18.3 N/A | 27.2 N/A Xmax: 28mm * | 28mm * Rms: 2000W * | 2000W * Sealed box: N/A cuft | N/A cuft Ported box: 5-10cuft | 5-10cuft Sub OD: 18.500” | 18.500” Cut ID: 16.750” | 16.750” Mounting depth: 10.250” | 10.250” Displacement: 0.26cuft | 0.26cuft Product code: 00218 Price: $ 414.00 Quote you can cook bacon shirtless if you're not a pussy...lol not hatin, but am i wrong here it looks as if the amp is not grounded its hooked directly to the battery. it that the way it should be. DC POWER Link to comment Share on other sites More sharing options...
Guest KyleCannon Posted March 20, 2009 Report Share Posted March 20, 2009 (edited) I don't need the mounting depth I need the height from the bottom of the cone to the top. is that what the sub OD is 18.5 inches? just didn't know what OD stood for. Edited March 20, 2009 by KyleCannon Quote Link to comment Share on other sites More sharing options...
ROBERT 04XBLZ Posted March 20, 2009 Report Share Posted March 20, 2009 I don't need the mounting depth I need the height from the bottom of the cone to the top. just add a couple inches. make it 15 to be safe. with box and sub. Quote My New Build checklist: (3) 18'' btl fully loaded d2 Link to comment Share on other sites More sharing options...
Guest KyleCannon Posted March 20, 2009 Report Share Posted March 20, 2009 an 18" sub cone and make the height of the box 15" ? Sorry, I am just trying to make sure here because I am going to start messing around in sketchup Quote Link to comment Share on other sites More sharing options...
Team_DC-Derrick Posted March 20, 2009 Report Share Posted March 20, 2009 the mounting depth is going from the ring of the cone to the bottom of the magnet... so add 5" from that, is where he got 15 your thinking of the diameter of the sub which is 18" Quote The DC Integra 3 18s to 6 15 build log Team_DC-Derrick's Youtube Team DC Audio where theres a will theres a wall....... I just realized Steve has reach Voldemort status, over on JP's site he is the one who will not be named....."We dont speak his name over here, fearing it will destroy us" LOL not even in hush tones Link to comment Share on other sites More sharing options...
Guest KyleCannon Posted March 20, 2009 Report Share Posted March 20, 2009 Alright So if the diameter of the sub is 18 inches, then i would need to make the enclosure about 20" high to put that baby in a box? Quote Link to comment Share on other sites More sharing options...
Noobtastic14 Posted March 20, 2009 Report Share Posted March 20, 2009 (edited) Sub ID is Inner Diameter (size of the hole) and sub OD is Outer Diameter (outside of the basket) so 16.75+1.5 = 18.25" smallest total height of the box if the woofer is completely upright -Drew Edited March 20, 2009 by Noobtastic14 Quote I am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. uhoh_45 said: dont be a pussy P give the jeep to drew Link to comment Share on other sites More sharing options...
ROBERT 04XBLZ Posted March 20, 2009 Report Share Posted March 20, 2009 why dont you measure your trunk and tell us what you have to work with. Quote My New Build checklist: (3) 18'' btl fully loaded d2 Link to comment Share on other sites More sharing options...
Guest KyleCannon Posted March 20, 2009 Report Share Posted March 20, 2009 Will do. Thanks Everyone. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.