Jump to content

First Litle Fiberglass Box Project


Recommended Posts

So basically he wanted it concealed and I began looking around in the back and found this neat little place.

Posted Image

Posted Image

Posted Image

Posted Image

First a layer or two of glass cloth

Posted Image

Posted Image

Few layer of matting

Posted Image

More layers

Posted Image

Few more and then out it came

Posted Image

Here it is trimmed up and ready for the baffle to be glassed on

Posted Image

And here is the baffle attached with 3 layer of mat and 2 layer of cloth and painted

Posted Image

Posted Image

Came out pretty decent considering my hands are big and this box is small and it was my first time...it fits perfect and its not gonna break at all....I tested it with some pretty decent force....such as slamming it off the floor and wall and hard as I could...:)

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

  • Replies 34
  • Created
  • Last Reply

That looks really good!

Thanks that's some of my handy jigsaw work lol...

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Thanks for the comments guys :)

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

nice spot for an 8"! what did you use to trim the edges of the mold?

Link to comment
Share on other sites

Clean.

-Installer for Duke's Car Stereo

2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune.

RF T1000-1bdCP and T400-4

Boston Acoustics SPG 555

Kenwood eXcelon 995

RF Punch 6.5" components and MB Quart Premium 6x9"s

Powermaster Alternator, YellowTop D34, Vmax CT1000

Link to comment
Share on other sites

nice spot for an 8"! what did you use to trim the edges of the mold?

My dads grinder and a cutting wheel cut, it cut through it like butter.

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

My dads grinder and a cutting wheel cut through it like butter.

i have to get me one of those the last time i did it i only used a dremel and it sucked

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 306 Guests (See full list)

    • There are no registered users currently online



×
×
  • Create New...