fritosaregood Posted May 12, 2009 Author Report Share Posted May 12, 2009 finished all my finals. i started on the daily port i made the flare radius 2" insted of 4" and it didnt bend well at all. im gonna sand down the unround parts, im also only doing 2 sided with flares instead of all 4. this way it might look more hidden, even thought its gonna come out on top of the back seat. more toys from ebay. 100, 80 grit sandin sleeves for a dremel. 7.99 plus shipping the port cant see the bad kerf though seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
Slinky Posted May 12, 2009 Report Share Posted May 12, 2009 nice bracing. should but super sturdy. DD M4 Rockford Fosgate P500-4 SoundQubed HDC415 w carbon fiber cap 2 Rockford Fosagate T1675-S XS Power D3400 Under Hood XS Power D5100 in rear Michael Singer 200A Alt Build Log: http://www.stevemeadedesigns.com/board/topic/153901-2012-veloster-update-842013-wall-build-4-15s/ Link to comment Share on other sites More sharing options...
trainman0978 Posted May 12, 2009 Report Share Posted May 12, 2009 damn good work.... are you worried about having that internal flare opening inside the box and sound waves getting behind it and creating some port noise? 2007 Toyota FJ Cruiser Voo Doo Blue my upgrades and "build" thread. My Kulicki Box Build -Alpine 9887 head unit, KTX-100EQ imprint-( sound quality for dummies! ). - MB Quartz 3.5" in back pillars -Sundown Audio SAX100.4 - JL Audio 3 way 6.5" component set XR653-CSi ( doors and dash ) -JL Audio 2 way Component set XR650CSi - Alpine MRD - M1005 - Alpine Type - R 12" subs -- 2 - 12" s in a Pete kulicki designed box. -Alpine High speed Ipod cable, and KCA-SC100 with Sirius sat. radio -All wiring is Stinger 12 gauge and HPM Level 3 RCAs, KnuKonceptz Kolossus Power and ground and Big done in 1/0, -270 sq. ft. of Damplifier Pro, 36 sq. ft. of Overkill Pro, 6 full sheets of Luxury Liner, and a gallon of spectrum- -2 Powermaster D680 Powercells in back FINALLY !!! I GOT IT METERED ON THE TERMLAB !!! I did a 140.2 at 42 hertz. Shoehorn, BFH, forklift,duct tape and some zip ties Link to comment Share on other sites More sharing options...
Amalan Posted May 12, 2009 Report Share Posted May 12, 2009 sexiest port ever, something about kerfed ports makes me hard. love the build keep up the good work Link to comment Share on other sites More sharing options...
fritosaregood Posted May 12, 2009 Author Report Share Posted May 12, 2009 damn good work.... are you worried about having that internal flare opening inside the box and sound waves getting behind it and creating some port noise? I dont think that will be a problem. the port is 64sq in, so port noise shouldnt be there, the flare should work to prevent it. im workin on the daily port right now. its rainin and i had to fiberglass the flare and its taking forever to cure. I was hoping to have it playing today, but looks like it wont happen now. ill get the pics up when i finish up for today seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
BanginOnABudget Posted May 12, 2009 Report Share Posted May 12, 2009 damn uve got serious skills son. im so jelouse lol. im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!! Link to comment Share on other sites More sharing options...
Gotz1lung Posted May 13, 2009 Report Share Posted May 13, 2009 Ummm... WOW Killer work, that Bracing is cool as hell looking too! 93 Chevy Silverado Crossfire,Dayton Soon to have 6 Lvl4 15s DC Audio Dealer and Team Member Link to comment Share on other sites More sharing options...
wL<3bass Posted May 13, 2009 Report Share Posted May 13, 2009 Very nice craftsman ship....but I must say...you got ripped on the little $4 nuts.....I can get them here for $0.38 each.......and 72" of allthread for $4.65 at the local tractor supply...I go there for all my hardware....ACE is a rip off. Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
fritosaregood Posted May 13, 2009 Author Report Share Posted May 13, 2009 Very nice craftsman ship....but I must say...you got ripped on the little $4 nuts.....I can get them here for $0.38 each.......and 72" of allthread for $4.65 at the local tractor supply...I go there for all my hardware....ACE is a rip off. dang... i got my stuff from lowes. I'll have to go over the tractor supply place here and see what they have seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
fritosaregood Posted May 13, 2009 Author Report Share Posted May 13, 2009 I finished building up the daily port today. it took forever because the resin wouldnt dry. tomorrow or thursday ill get it wrapped in carpet..depends on if i find any money before payday. i added some fiberglass on the outside to round it out better. but that resin was takin forever so i decided to clean off my workspace and organize the scrap mdf and this is how i use most of the left over circle cutouts seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.