BEllithorpe04 Posted June 3, 2009 Author Report Posted June 3, 2009 thanks for the replies guys, the box comes out tomorrow....and ill have like 4 hours to work until i have to install streetglow on a 2008 cobalt which will def. take some time. But yes i do know my flaws on this one and its tearing me apart!!! The countersinks will be bondo'd and the edges will be routered and hopefully some 45's in there and fiberglassed. i def. need a brace in the middle, thinkin a 2x4 or all thread. I also need to do some bolt terminals to finish this bad boy off. God i cannot wait to get this done before slamtology..... 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build
cc_audio Posted June 3, 2009 Report Posted June 3, 2009 thanks for the replies guys, the box comes out tomorrow....and ill have like 4 hours to work until i have to install streetglow on a 2008 cobalt which will def. take some time. But yes i do know my flaws on this one and its tearing me apart!!! The countersinks will be bondo'd and the edges will be routered and hopefully some 45's in there and fiberglassed. i def. need a brace in the middle, thinkin a 2x4 or all thread. I also need to do some bolt terminals to finish this bad boy off. God i cannot wait to get this done before slamtology.....Allthread is easiest in your case and won't affect tuning at all really, due to small size. Where did you mount the amp? If your putting it on the box, be sure to double baffle where ever you mount it since you have flex going on. Hate to rattle it apart. Definatly run some 45s in there aswell. Nice build. DIY or die. Thats my motto... It's all gone! The Celica Build Feedback If I buy something from you, DO NOT USE FEDEX!
BEllithorpe04 Posted June 4, 2009 Author Report Posted June 4, 2009 thanks cc, the amp is on the ground next to it, but im thinking about spinning the box around so the port shoots into the car, and then make a little bondo amp rack to mount on the back of the box opposite of where the port is and dress is up to match the inside of the car, the trim pieces and speaker pods that is. I have only made my own boxes, except for the first one that my uncle gave me with my first system. Ive made about 30 boxes in the last year, installed about 25 setups, but this is my first log, and my best sounding system to date, i love it. My friend has all thread so ill get some from him tomorrow and go with that. The flex is only on the top baffle for the record, at least that i can see now, i would guess theres more but there will be NO flex after tomorrow veyyy nicee 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build
BEllithorpe04 Posted June 19, 2009 Author Report Posted June 19, 2009 Ok, so i actually had some time this week to work on the box and my new amp rack. I have had ACT classes and other things that had to get done before i could finish this up, so I'm sorry for the wait if anyone had been waiting lol. Well here are the pics, got some textured rustoleum paint to finish off the box, and im using the same paint that i have in the interior for the amp rack my subs all lined up one of the things i had to do, a kid's streetglow on his 2008 chevy cobalt ss some 45's 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build
BEllithorpe04 Posted June 19, 2009 Author Report Posted June 19, 2009 starting the amp rack sanded the skin right off my hand after about 4 and a half hours, the most inconvient place for it 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build
BEllithorpe04 Posted June 19, 2009 Author Report Posted June 19, 2009 im doing a gloss black on the top and the side of the wood that doesnt have blue paint, so ill have more pics when that is up 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build
Mrbubbles00482 Posted June 19, 2009 Report Posted June 19, 2009 The amp rack looks pretty nice man. Good job, keep up the work!
BEllithorpe04 Posted June 19, 2009 Author Report Posted June 19, 2009 thanks man, still a work in process 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build
BEllithorpe04 Posted June 24, 2009 Author Report Posted June 24, 2009 no interest? 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build
red2chfd Posted June 24, 2009 Report Posted June 24, 2009 more pics I am the Crazy Hair from Live Loud Audio http://www.youtube.com/llacrazyhair http://www.facebook.com/red2chfd
Recommended Posts
Archived
This topic is now archived and is closed to further replies.