Crump Posted June 24, 2009 Report Share Posted June 24, 2009 Well I am not happy with how my friend who installed my components back when i had my wisdom teeth removed, so im redoing them, fixing my engine noise, my sub's hole, and trying to make my trunk's wires cleaned up a bit. Ok so not much done today just cleared out the trunk. Its so perty All out Where did it go? Asked Rusty last night at about 5 am what i need to use to fix my sub correctly, he relpied to me in about 4 hours. Thats Customer Service. ^100% silicone on the top+bottem of the cut. Everything chilling in the corner Git r done Fail And heres what i am thinking about for my amprack. I tryed it on paint so idk if you can tell what im trying to do, but here ya go. LMK what you think Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
enemyofsilence Posted June 24, 2009 Report Share Posted June 24, 2009 the amp rack looks like a good idea. the only thing i would say about it is i dont know if it will fit. your box looked pretty tight without that rack in the back. i would say to measure the box and see how much you have to work with. my .02 Team Bass-Hz Link to comment Share on other sites More sharing options...
98HOEONSIXEZ Posted June 24, 2009 Report Share Posted June 24, 2009 Did you PORT your subwoofer?lol Link to comment Share on other sites More sharing options...
Crump Posted June 24, 2009 Author Report Share Posted June 24, 2009 the amp rack looks like a good idea. the only thing i would say about it is i dont know if it will fit. your box looked pretty tight without that rack in the back. i would say to measure the box and see how much you have to work with. my .02From the front of my box to the the opening of the trunk i have about 4-6 inches, from the back of the box to where the seats fold up i'll have about 12-16 inches, so it all depends on the angle of the rack and where im going to put the batt, but thats the main idea. And thats where the T-1000-1bd and My new T-400-4 are going to be. The total width is 32 and the amps add up to about 31.4" so i hope itll be ok.Did you PORT your subwoofer?lolYeah i was drilling at an angle and it slipped and pop. But from what ive showed rusty and nick (pics) they said just put some 100% clear silicone or something of that nature on the underside and it should be ok. So ill let it dry and see what happens. if i need a recone ill get a recone Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
lolitskasey Posted June 24, 2009 Report Share Posted June 24, 2009 ROFL i just did that to my sub. Link to comment Share on other sites More sharing options...
Slapuhho Posted June 24, 2009 Report Share Posted June 24, 2009 Terrible build. 4 18's, low power and lots of gay fur. Team gg Team DOA My Videos Link to comment Share on other sites More sharing options...
98HOEONSIXEZ Posted June 24, 2009 Report Share Posted June 24, 2009 ROFL i just did that to my sub.LOL im sure ill do that one day too,but untill i can join yall need to start a ported sub club LOLs Link to comment Share on other sites More sharing options...
97maxima Posted June 24, 2009 Report Share Posted June 24, 2009 Terrible build. Ys that American Bass*DC Power Link to comment Share on other sites More sharing options...
Crump Posted June 24, 2009 Author Report Share Posted June 24, 2009 Ys thatHe's a dick from a couple blocks away but he's the shit. Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
Crump Posted June 28, 2009 Author Report Share Posted June 28, 2009 Small update: lil bit of amp rack and a place to put my battery. **Thanks Ray for the help on the 60 degree thing it worked out great** Thisll be screwed down onto the top of the box. The amps take up about 31.35" of the 32" rack. Fits like a glove For my little Hc 1800 which should be here anyday from darvex. Anyway then it got dark and it was hot as hell, so ill try to finish it up tmm, but i work 11-9. Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.