Jump to content

Recommended Posts

At first I was going to run 2 L7 15's, but i have changed my mind to run only one, and since the L7 im running is a 08' DVC 4 ohm, it can only be run down to 2 ohms and im losing major wattage from my amp. Is there anyway to change this to the DVC 2 ohm version, or am i going to have to trade/sell it for the 2 ohm version?

Thanks,

-Dave-

Link to comment
Share on other sites

There once was a product that would change your impedance, but it is no longer made and I cannot remember the name of it. If you can get a hold of one of those, it would work perfectly fine without having to trade for a diff model

Car

1996 Sable LS

8,000K Bi-Xenon HID's

Pioneer Premier DEX-P1R

Diamond Audio D351, Diamond Audio D362i, Diamond D3TAK off Kicker ZX200.4

Custom 15" 13w7 motor, 3.5" aluminum coils dual 1 ohm off NV-AM25001

Dynamat Dynaliner Second Skin Damplifier Pro

Stock 130A Alternator

My Build

Truck

1995 Ford F-150 Flareside XLT

10,000K Bi-Xenon HID's, 15,000K Bi-Xenon HID's

Kicker KS6502, KS400 off Pioneer Premier PRS-D4100F

Truck Build

Ref(s) Rogers, Jared, Mikesmith0890, Twigz, DHFHades, BASS14, Solo_X18, mrafrica, camino_1to3, kickerassman

[speakerman9000] 5:43 pm: if sony sucks so bad how come my amps still work when i had 3 12s on it

[capalass23] 11:27 pm: wow u grand man poopin out babys like hto cakes

[KevinniveK] can u have sex later please hes helping me

Link to comment
Share on other sites

just get a DVC 2ohm re-cone kit

australia03junehl4.gifCURRENT SET UP

Factory HeadunitGladen dual splits

Audio helon 4ch amp

Audio Helon 9kwrms monoBlock

2 15" Custom built Pap subs rated at 3kwrms each

Link to comment
Share on other sites

just get a DVC 2ohm re-cone kit
Recone is probably your cheapest uption.

Too bad you can't recone L7s....

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

yeah kicker just gives you a discount on a new one

Which turns out to be more than you can buy a new one of ebay for....alot more.

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1730 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...