Jump to content
Second Skin Audio

Power Acoustik MOFO


protocaster69

Recommended Posts

I enjoyed mine when i had it......took 1700 like a champ!

My POS Bass machine-
2003 Hyundai Santa Fe on some shitty 22's
Bed Liner Paint Job-Pioneer AVH 3200DVD
4 DAD BD series 15's in a 4th Order (Bassheads ENT Design)
4 Arc Audio XDI2000.1 for the woofers
6 Cadence CVL68MBX 6.5's-Cadence CVL88MBX 8's-6 Cadence XT20 Supertweeters
2 Arc Audio KS300.4's for mids and tweets
1 Arc Audio ALD 10v Line Driver
All Audiotechnix Power wire
1 DC Power 270XP High Output Alternator
1 XS Power D3400 up front....6 XS Power D3100's in the rear
Air Lift 1000 Bags in rear to help with suspension
If your still reading this GFY.......

6iW2jaE_zpsb3084721.png
Link to comment
Share on other sites

MOFOs need about 2.4 cubic feet each plus 2 ports per sub.

98 Chevy Blazer 4 Door

Stock Everything

The New Setup

1 - Pioneer AVH-P5200DVD

1- Pioneer DEH-80PRS

2 - Blues Audio 5.25 Mids ( On the dash )

2 - Blues Audio BL8.0C Components ( In the front doors )

2 - Blues Audio BL8.0 Woofers ( In the rear doors )

1 - Linear Power 952 ( Dash )

1 - Linear Power 2202IQ Modified ( Components )

1 - Linear Power 3002 ( Rear Doors )

1 - SoundStream XBP-10 Processor

1 - SoundStream BX-20Z

2 - SoundStream DTR1.3400D

4 - RE Audio SX12D4

241543L22m9xYv.gif

Link to comment
Share on other sites

1700 from what?

Why would it matter how many ports it had?

A brutus 2608 @ 1ohm ...gains set low....and ports aren't sub specific ...do whatever works.

My POS Bass machine-
2003 Hyundai Santa Fe on some shitty 22's
Bed Liner Paint Job-Pioneer AVH 3200DVD
4 DAD BD series 15's in a 4th Order (Bassheads ENT Design)
4 Arc Audio XDI2000.1 for the woofers
6 Cadence CVL68MBX 6.5's-Cadence CVL88MBX 8's-6 Cadence XT20 Supertweeters
2 Arc Audio KS300.4's for mids and tweets
1 Arc Audio ALD 10v Line Driver
All Audiotechnix Power wire
1 DC Power 270XP High Output Alternator
1 XS Power D3400 up front....6 XS Power D3100's in the rear
Air Lift 1000 Bags in rear to help with suspension
If your still reading this GFY.......

6iW2jaE_zpsb3084721.png
Link to comment
Share on other sites

  • 3 weeks later...

ive prolly had the most experience here with mofos. ive had a total of probably 6 12's and played with a few 15's. i had a wall of 4 12's running off of two pa3000db's. lets just say the little crack that a rock had made in my windshield turned into multiple cracks across the entire windshield. they were surprisingly loud and low for how much they costed. sound quality was decent. (better for rap than fast metal)

DD M4


Rockford Fosgate P500-4


SoundQubed HDC415 w carbon fiber cap


2 Rockford Fosagate T1675-S


XS Power D3400 Under Hood


XS Power D5100 in rear


Michael Singer 200A Alt


Build Log: http://www.stevemeadedesigns.com/board/topic/153901-2012-veloster-update-842013-wall-build-4-15s/

Link to comment
Share on other sites

ive prolly had the most experience here with mofos. ive had a total of probably 6 12's and played with a few 15's. i had a wall of 4 12's running off of two pa3000db's. lets just say the little crack that a rock had made in my windshield turned into multiple cracks across the entire windshield. they were surprisingly loud and low for how much they costed. sound quality was decent. (better for rap than fast metal)

what size enclosure for single 15 you reccommend?

1998 Monte Carlo Z34

Stock HU but have replacement

Stock Highs

Stock Electrical

BTL 18 sitting naked

AP1500D

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 197 Guests (See full list)

×
×
  • Create New...